Panasonic KXHNS102E Operating Guide
Inserting the
batteries
R USE ONLY Alkaline batteries AA
(LR6) size.
R Do NOT use Manganese/Ni-Cd/
Ni-MH batteries.
R Confirm the polarities (
,
).
1
Remove the rear cover by
pressing the upper sides of the
cover (A) and sliding it down (B).
pressing the upper sides of the
cover (A) and sliding it down (B).
A
B
2
Insert the batteries.
3
Install the rear cover.
R Place it with the “
R Place it with the “
” mark
facing upwards and slide it.
Registering the
motion sensor
This procedure is not required for
devices that were included as part of
a bundle.
devices that were included as part of
a bundle.
Before you can use the motion sensor,
it must be registered to the hub.
If you purchased devices separately
(i.e., not as part of a bundle), you must
register each device to the hub.
it must be registered to the hub.
If you purchased devices separately
(i.e., not as part of a bundle), you must
register each device to the hub.
You can register each device by using
the registration buttons or the [Home
Network] app.
the registration buttons or the [Home
Network] app.
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
9
Setup
HNS102E_(en_en)_0421_ver.060.pdf 9
2015/04/21 14:01:23