Panasonic kx-tg4321 Operating Guide

Page of 56
Programming
26
For assistance, please visit http://www.panasonic.com/help
L
When the handset is in use, the alarm 
will not sound until the handset is in 
standby mode.
L
If you select “Once”, the setting 
changes to “Off” after the alarm 
sounds.
L
When the ringer volume for outside 
calls is set to off (page 23), the alarm 
sound is heard at a low level.
Customer support
The handset can display the Internet 
address where you can download the 
operating instructions or get further 
information for this product by using your 
computer.
1
{
MENU} i {#}{6}{8}{0}
2
{
OFF}
Registering a unit
Operating additional 
handsets
Additional handsets
Up to 4 handsets can be registered to 
the base unit.
Important:
L
See page 5 for information on the 
available model.
Registering a handset to a 
base unit
The supplied handset and base unit are 
pre-registered. If for some reason the 
handset is not registered to the base 
unit, register the handset.
1
Handset:
{
MENU} i {#}{1}{3}{0}
2
Base unit:
Press and hold {LOCATOR} for 4 
seconds until the registration tone 
sounds.
L
If all registered handsets start 
ringing, press the same button to 
stop. Then repeat this step.
L
The next step should be 
completed within 90 seconds.
3
Handset:
Press {OK}, then wait until a long 
beep sounds.
4
{
OFF}
Note:
L
While registering, “Base 
registering”
 is displayed on all 
registered handsets.
L
When you purchase an additional 
handset, refer to the additional 
handset’s installation manual for 
registration.
Deregistering a handset
A handset can cancel its own 
registration (or the registration of 
another handset) that is stored in the 
base unit. This allows the handset to end 
its wireless connection with the system.
1
{
MENU} i {#}{1}{3}{1}
2
{
3}{3}{5} i {OK}
3
Select the handset you want to 
cancel by pressing the desired 
handset number.
TG43xx_OI.book  Page 26  Tuesday, December 11, 2007  2:04 PM