Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. KXMB781
  5. Operating Guide

Panasonic KXMB781 Operating Guide

Download
Page of 20
1. Introduction and Preparation
11
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
Initial Programming
1.9 Date and time (KX-MB781 
only)
1
{
MENU} i {#}{1}{0}{1} i {SET}
M:
|
01/D:01/Y:07
TIME: 12:00AM
2
Enter the current month/date/year/hour/minute by 
selecting 2 digits for each.
Example: August 10, 2007 10:15 PM (12 hour 
clock format)
1. Press {0}{8} {1}{0} {0}{7} {1}{0} {1}{5}.
M:
|
08/D:10/Y:07
TIME: 10:15AM
2. Press {*} repeatedly to select “
PM”.
3
{
SET}
4
Press {MENU} to exit.
1.10 Your logo (KX-MB781 only)
You can program your logo (name, company name, etc.) 
so that it appears on the top of each page sent.
1
{
MENU} i {#}{1}{0}{2} i {SET}
LOGO=
|
2
Enter your logo, up to 30 characters using the dial 
keypad. i {SET}
3
Press {MENU} to exit.
1.11 Your fax number (KX-MB781 
only)
You can program your fax number so that it appears on 
the top of each page sent.
1
{
MENU} i {#}{1}{0}{3} i {SET}
NO.=
|
2
Enter your fax number, up to 20 digits.
L
To enter a “
+”, press {*}.
L
To enter a space, press {#}.
L
To enter a hyphen, press {FLASH}.
L
To erase a number, press {STOP}.
3
{
SET}
4
Press {MENU} to exit.
1.12 Configuring the unit to 
access the LAN (KX-MB781 only)
You can print documents, scan documents, receive 
faxes or send faxes using a computer on the LAN. To 
enable these features, you need to set the IP address, 
subnet mask, and default gateway for the unit.
Important:
L
Consult your network administrator when setting 
the IP address, subnet mask, and default 
gateway.
1.12.1 Setting up automatically with a 
DHCP server
Your situation:
–
When only one unit is connected to the LAN.
If your network administrator manages the network with 
a DHCP (Dynamic Host Configuration Protocol) server, it 
will automatically assign an IP (Internet Protocol) 
address, subnet mask, and default gateway to the unit.
1
After connecting the LAN cable to the unit and the 
computer, connect the power cord.
L
The IP address, subnet mask, and default 
gateway will be set automatically.
2
Install Multi-Function Station on the computer that 
you want to use it with.
1.13 Installing Multi-Function 
Station
L
Install Multi-Function Station (CD-ROM) before 
connecting the unit to a computer with USB 
cable. If the unit is connected to a computer with 
USB cable before installing Multi-Function 
Station, the [Found New Hardware Wizard] 
dialog box will appear. Click [Cancel] to close it.
L
Software features and appearance are subject to 
change without notice.
Warning:
L
To assure continued emission limit compliance;
–
use only shielded USB cable.
–
use only shielded LAN cable (category 5 straight 
cable) (KX-MB781 only).
1
Start Windows
®
 and exit all other applications.
L
For Windows 2000, Windows XP and Windows 
Vista™ operating system users, you must be 
logged in as an administrator in order to install 
Multi-Function Station.
2
Insert the included CD-ROM into your CD-ROM 
drive.
3
[
Easy installation]
L
The installation will start.
4
When the setup program starts, follow the on-screen 
instructions.
5
The [Connect Type] dialog box appears.
For USB connection:
1. [Connect directly with a USB cable.] i [Next]
L
The [Connect Device] dialog box will appear.
MB271-781-PFQW2640ZB-QRG-en.book  Page 11  Thursday, August 2, 2007  11:31 AM