Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. TX-65AX800E
  5. Operating Guide

Panasonic TX-65AX800E Operating Guide

Download
Page of 268
- 208 -
Power on Link
Set 
Power on Link
 to 
On
 in 
VIERA Link Settings
 to use this function.
When the connected equipment starts playback or direct navigator / function 
menu for the equipment is activated, the TV is automatically turned on. (Only 
when the TV is in Standby mode.)
Power off Link
Set 
Power off Link
 to 
On
 in 
VIERA Link Settings
 to use this function.
When the TV is set to Standby mode, the connected equipment is also 
automatically set to Standby.
 
●
This function will work even if the TV enters Standby mode automatically 
by auto power standby function.
Standby Power Save
Set 
Standby Power Save
 to 
On
 in 
VIERA Link Settings
 to use this function.
The power consumption of the connected equipment in Standby mode is 
controlled higher or lower in synchronisation with the TV on / off state to 
reduce the consumption.
When the TV is set to Standby mode, the connected equipment is 
automatically set to Standby and the power consumption of the connected 
equipment is automatically minimised.
When the TV is turned on, the connected equipment is still in Standby mode, 
but the power consumption is increased to start the connected equipment 
fast.
 
●
This function is effective if the connected equipment can change the power 
consumption in Standby mode and is set to higher consumption.
 
●
This function works when 
Power off Link
 is set to 
On
.
Intelligent Auto Standby
Set 
Intelligent Auto Standby
 to 
On
 in 
VIERA Link Settings
 to use this function.
When the TV is on, non-used connected equipment goes into Standby mode 
automatically to reduce the power consumption. For example, when the input 
mode is switched from HDMI or when 
Speaker Selection
 is changed to 
TV
 
(except for watching a disc).
 
●
This function may not work properly depending on the connected 
equipment. In this case, set to 
Off
.