Panasonic KXTG9582 Operating Guide
Wall mounting
The base unit can be mounted on a wall by
changing the wall mounting adaptor’s position.
changing the wall mounting adaptor’s position.
Note:
R Make sure that the wall and the fixing method
R Make sure that the wall and the fixing method
are strong enough to support the weight of the
unit.
unit.
Base unit
1
To remove the wall mounting adaptor, push
down the release levers (A). Remove the
adaptor (B).
down the release levers (A). Remove the
adaptor (B).
A
B
B
B
B
A
2
A Turn the adaptor so that the words “UP
WALL” are facing up.
B Tuck the telephone line cord inside the wall
mounting adaptor.
C Connect the AC adaptor cord and
telephone line cord.
WALL” are facing up.
B Tuck the telephone line cord inside the wall
mounting adaptor.
C Connect the AC adaptor cord and
telephone line cord.
2
3
1
3
Insert the lower tabs of the adaptor into the
unit’s bottom slots (A), then insert by pushing
unit’s bottom slots (A), then insert by pushing
down the levers of the adaptor into the upper
slots (B).
R The words “UP WALL” should be facing up.
slots (B).
R The words “UP WALL” should be facing up.
A
A
B
B
4
Mount the unit on a wall then slide down to
secure in place.
R This product is compliant with the following
secure in place.
R This product is compliant with the following
wall phone plate sizes (2 types).
1
83 mm (3
1
/
4
inches)
2
102 mm (4 inches)
Fit the slots of the unit onto the
corresponding wall phone plate tabs for
(
corresponding wall phone plate tabs for
(
3
) and (
4
) respectively.
3
4
1
2
3
4
Charger
Drive the screws (
1
) (not supplied) into the wall.
2
27.2 mm (1
1
/
16
inches)
1
2
70
For assistance, please visit http://www.panasonic.com/help
Useful Information
TG958x_0704_ver031.pdf 70
2014/07/04 10:32:29