Panasonic ERSB40 Operating Guide

13

 •Clean the main body, blade and the attachment after each use. 

(If not cleaned, the motion will become poor and the sharpness 

will worsen.)

 •Turn the appliance off.

 •Remove the main body from the AC adaptor.

►

To remove light dirt

To remove heavy dirt

1. Remove the attachment 

and turn the appliance on.

2. Run water down the water 

inlet at the front of the main 

body, rinse thoroughly for 

approximately 20 seconds, 

and then turn the appliance 

off.

• Rinse with water and 

shake up and down 

several times to remove 

the water.

1. Remove the attachment and 

blade.  

(See pages 11 and 14.)

2. Clean the main body, the 

blade and the attachments 

with running water.

 

 

• Rinse with water and 

shake up and down 

several times to remove 

the water.

3. Wipe off the water with a 

towel and let it dry naturally.

• It will dry faster with the 

blade removed.

4. Apply the oil to the blade after 

drying. (See page 14.)

5. Attach the blade and 

attachment to the main body.

The mark on the left means suitable for cleaning under 

an open water tap.

►

1. Remove the blade. (See page 14.)

2. Brush off any hair trimmings from the 

main body and from around the blade.

3. Brush off the hair trimmings from the 

blade edge.

4. Brush any hair trimmings out from 

between the stationary blade and the 

moving blade while pressing down the 

cleaning lever (b) to raise the moving 

blade.



5. Apply the oil to the blade. (See page 14.)

6. Attach the blade and attachment to the main body.

ER-SB40_CAN.indb   13

2017/07/18   18:04:15