Panasonic SC-PM39D Operating Guide

23

RQT7502

Use normal position tapes.
High position and metal position tapes can be played, but the unit will
not be able to do full justice to the characteristics of these tapes.

•

Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.

•

Tape slack can get caught up in the mechanism and should be
wound up before the tape is played.

•

Endless tapes can get caught up in the deck’s moving parts if used
incorrectly. Use tapes appropriate to this unit’s auto-reverse
mechanism.

 Insert cassette

Insert the cassette with the exposed tape facing you.

Side to be played back facing up.

(tape facing you, see 

– make sure that the
cassette is fully inserted
and close the lid by
hand).

Every press will
change the direction.
F 3 : Forward side

(front side)
will play.

4 R: Reverse side

will play.

Every time you press [PLAY MODE]:

: One side is played.

: Both sides are played (forward → reverse).

: Both sides are played repeatedly until [L

 

STOP] is

pressed.

[f 3

3

3

3

3 /FF])

[g 4

4

4

4

4/REW])

(during stop).

TPS finds the beginning of a track and resumes play from there. Each
press increases the number of tracks skipped, up to a maximum of 9.

The TPS function searches for silent parts of about 4 seconds in length
which are normally found between tunes. As a result, it may not function
properly in the following cases.

•

With short silent parts

•

When noise occurs between tunes

•

With silent parts found within tunes

(during play).

Press [L

 

STOP].

RQT7502_22_23_new

3/4/04, 3:16 PM

23