Panasonic SC-PM38 Operating Guide
ENGLISH
ENGLISH
RQTX0191
10
RQTX0191
11
ENGLISH
ENGLISH
RQTX0191
10
RQTX0191
11
This is a 24-hour clock.
1
1
Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:
Each time you press the button:
You can set the timer to come on at a certain time to wake you up.
Preparation
Turn the unit on and set the clock.
Prepare the music source (disc, radio, USB or iPod source) and set
the volume.
Prepare the music source (disc, radio, USB or iPod source) and set
the volume.
•
•
•
6
Press [^] to turn off the unit.
To
Action
change the settings
Repeat steps 1 to 4 and 6.
change the source
or volume
or volume
1) Press [z, PLAY] to clear the timer
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
3) Perform steps 5 and 6.
check the settings
(when the unit is on
or in standby mode)
(when the unit is on
or in standby mode)
Press [CLOCK/TIMER] repeatedly to select
z
z
PLAY.
cancel
Press [z, PLAY] to clear the timer indicators
from the display.
from the display.
The play timer will start at the preset time, with the volume increasing
gradually to the preset level.
The timer comes on at the set time every day if the timer is on.
The unit must be in the standby mode for the timer to function.
If you turn the unit off and on again while a timer is functioning, the
finish time setting will not be activated.
gradually to the preset level.
The timer comes on at the set time every day if the timer is on.
The unit must be in the standby mode for the timer to function.
If you turn the unit off and on again while a timer is functioning, the
finish time setting will not be activated.
•
•
•
•
•
•
This function enables you to turn off the unit automatically after the
set time.
set time.
Press [SLEEP] repeatedly to select your desired time.
To cancel
Press [SLEEP] to select “OFF”.
Press [SLEEP] to select “OFF”.
Changing the remaining time
Press [SLEEP] to show the remaining time, and press [SLEEP] again
to select your desired time.
Press [SLEEP] to show the remaining time, and press [SLEEP] again
to select your desired time.
The play and sleep timer can be used together. The sleep timer always
has priority. Be sure not to overlap timer settings.
has priority. Be sure not to overlap timer settings.
Sleep timer indicator
Play timer indicator
Start time
Note
Note
Setting the clock
Using the play timer
PLAY
Using the sleep timer
Finish time
2
Within 5 seconds, press [u/t] or [y/i] to set the time.
3
Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for a few seconds.
Press [CLOCK/TIMER] to display the clock for a few seconds.
The clock may lose or gain minutes over a period of time. Readjust as
necessary.
necessary.
Note
1
Press [CLOCK/TIMER] repeatedly to select play timer.
2
Within 5 seconds, press [u/t] or [y/i] to set the starting
time.
time.
3
Press [CLOCK/TIMER] to confirm.
4
Repeat steps 2 and 3 to set the finishing time.
To activate the timer
5
5
Press [z, PLAY] to turn on play timer.
CLOCK
zPLAY
Original display
CLOCK
zPLAY
Original display
z
PLAY
No display (off)
Using the timer
SC-PM38.indb 10
2/25/2009 5:17:41 PM