Panasonic SC-PM28 Operating Guide
RQT6888
5
Before use
The remote control
A
Battery installation
Use of batteries
• Align the poles (+ and –) properly when inserting the
batteries.
• Do not mix old and new batteries or different types of
batteries.
• Do not recharge ordinary dry cell batteries.
• Do not heat or disassemble the batteries. Do not allow
• Do not heat or disassemble the batteries. Do not allow
them to contact flame or water.
• Remove the batteries if the unit is not to be used for a long
time.
• Do not keep together with metallic objects such as
necklaces.
• Do not use rechargeable type batteries.
• Do not use batteries if the covering has been peeled off.
• Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can damage items the fluid contacts and may cause a
fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact
with any part of your body.
which can damage items the fluid contacts and may cause a
fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact
with any part of your body.
B
Correct method of use
Operation notes
• Do not place obstacles between the remote control signal
sensor and remote control unit.
• Do not expose the remote control signal sensor to direct
sunlight or to the bright light of a fluorescent light.
• Take care to keep the remote control signal sensor and
the end of the remote control unit free from dust.
• If this system is installed in a rack with glass doors, the
glass doors’ thickness or color might make it necessary to
use the remote control unit a shorter distance from the
system.
use the remote control unit a shorter distance from the
system.
To prevent damage
• Do not place heavy items on the remote control.
• Do not disassemble or reconstruct.
• Do not spill water or other liquids on the remote control.
• Do not disassemble or reconstruct.
• Do not spill water or other liquids on the remote control.
Placement of speakers
Speakers are designed identically so that no left or right
channel orientation is necessary.
channel orientation is necessary.
Notes
• Keep your speakers at least 10 mm away from the system
for proper ventilation.
• These speakers do not have magnetic shielding. Do not
place them near televisions, personal computers or other
devices easily influenced by magnetism.
devices easily influenced by magnetism.
• To avoid damage to the speakers, do not touch the
speaker cones if you have taken the nets off.
C
A
C
R6, AA, UM-3
B
Remote control
signal sensor
signal sensor
About 7 meters in
front of the signal
sensor.
front of the signal
sensor.
Transmission
window
window
RQT6888(2-10)new4.P65
2/11/03, 6:06 PM
5