Panasonic SC-PM28 Operating Guide
RQT6888
12
Listening operations
CDs
This unit can play MP3, WMA CD-DA (digital audio)
format audio CD-R and CD-RW that have been finalized
(a process that enables CD-R/CD-RW players to play
audio CD-R and CD-RW) upon completion of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
format audio CD-R and CD-RW that have been finalized
(a process that enables CD-R/CD-RW players to play
audio CD-R and CD-RW) upon completion of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
The unit contains five CD trays.
You can simply listen to the CD on a single tray, or you
can select and listen to the CD in a particular tray. See
the section on All-Disc play (
You can simply listen to the CD on a single tray, or you
can select and listen to the CD in a particular tray. See
the section on All-Disc play (
\ page 14) for information
on how to listen to all the CDs one after the next.
Listening to the CD on a single tray
1
Press [c OPEN/CLOSE] to open the disc tray
and insert the CD.
and insert the CD.
The unit comes on automatically and tray 1 opens.
Press [c
Press [c
OPEN/CLOSE] again to close the tray.
2
Press [CD
2/ J] to start play.
The selected CD is played from the first track to the last
track in order. After the last track, the player stops
automatically.
track in order. After the last track, the player stops
automatically.
3
Adjust the volume.
To stop the disc
Press [STOP L, –DEMO].
Press [STOP L, –DEMO].
To pause play
Press [CD
Press [CD
2/J]. Press [CD 2/ J] again to resume play.
Skipping tracks
Press [g 4
Press [g 4
4
4
4
4/REW] (backward) or [f 3
3
3
3
3/FF] (forward).
Searching through tracks
During play or pause
Press and hold [g 4
During play or pause
Press and hold [g 4
4
4
4
4/REW] (backward) or [f 3
3
3
3
3/FF]
(forward).
CD indicator
The CD indicator on the display lights whenever the tray is
in the playing position whether is it loaded or not.
The CD indicator on the display lights whenever the tray is
in the playing position whether is it loaded or not.
One touch play
If the unit is in standby mode and a CD is loaded, press
[CD
If the unit is in standby mode and a CD is loaded, press
[CD
2/J] or [CD 1] ~ [CD 5].
The unit will come on automatically and play will start.
A
CD selection and care
With this system, you can only play CDs having this mark. (
a)
Do not;
• use irregularly shaped CDs. (
• use irregularly shaped CDs. (
b)
• attach extra labels and stickers.
• use CDs with labels and stickers that are coming off or
• use CDs with labels and stickers that are coming off or
with adhesive exuding from under labels and stickers. (
c)
• attach scratch-proof covers or any other kind of accessory.
• write anything on the CD.
• clean CDs with liquids. (Wipe with a soft, dry cloth.)
• use CDs printed with label printers available on the market.
• write anything on the CD.
• clean CDs with liquids. (Wipe with a soft, dry cloth.)
• use CDs printed with label printers available on the market.
To prevent damage
Always observe the following points.
• Set the system on a flat, level surface.
• Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
• Do not move the system while tray is opening/closing, or
when loaded. Always unload all CDs before moving the
system.
system.
• Do not put anything except a CD in the tray.
• Do not use cleaning CDs or CDs which are badly warped
• Do not use cleaning CDs or CDs which are badly warped
or cracked.
• Do not disconnect the AC mains lead from the household
mains socket during CD changing operation.
A
1
2
3
DOWN
DOWN
VOLUME
VOLUME
UP
a
b
c
OPEN/CLOSE
OPEN/CLOSE
2
1
3
(CD 1) ~ (CD 5)
/REW
/FF,
DEMO
STOP
,
CD
1
CD indicator
Elapsed play time
Disc tray
Label must face upward.
Track number
RQT6888(11-15)new3.P65
2/17/03, 6:48 PM
12