Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. SC-PM45
  5. Operating Guide

Panasonic SC-PM45 Operating Guide

Download
Page of 58
RQTV0177
11
11
ENGLISH
Timer
Setting the clock
Setting the clock
This is a 24-hour clock.
1
Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:
CLOCK
˚ PLAY
Original display
˚ REC
2
Within 5 seconds, press [ /REW/
4] or [ /FF/¢] 
to set the time.
3
Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for few seconds.
Note
The clock may lose or gain minutes over a period of time. Readjust 
as necessary.
Using the sleep timer
Using the sleep timer
This function enables you to turn off the unit automatically 
after the set time.
Press [SLEEP] repeatedly to select your desired time.
Sleep timer indicator
To cancel
Press [SLEEP] to select “OFF”.
Changing the remaining time
Press [SLEEP] to show the remaining time, and press 
[SLEEP] again to select your desired time.
Note
•  The play and sleep timer or the record and sleep timer can be used 
together.
• The sleep timer always has priority. Be sure not to overlap timer 
settings.
Using the play or record timer
Using the play or record timer
You can set the timer to come on at a certain time to wake 
you up (play timer) or to record from the radio or music port 
source (record timer).
Preparation
Turn the unit on and set the clock.
Timer
Action
Play timer
Prepare the music source you want to 
listen to; cassette, disc, radio, USB or 
music port source, and set the volume.
Record timer
Check the cassette’s erasure prevention 
tabs (
➡
 page 9), insert the cassette (
➡
 
page 9) and tune to the radio station (
➡
 
page 10) or select the music port source 
(
➡
 page 13).
1
Press [CLOCK/TIMER] repeatedly to select your 
desired timer.
CLOCK
˚ PLAY
Original display
˚ REC
2
Within 5 seconds, press [ /REW/
4] or [ /FF/¢] 
to set the starting time.
Play timer indicator
Start time
Record timer indicator
3
4
Press [CLOCK/TIMER] to confirm.
Repeat steps 2 and 3 to set the finishing time.
Finish time
To activate the timer
5
Press [
˚PLAY/REC] to turn on your desired timer.
˚ PLAY
no display (off)
˚ REC
6
Press [
y] to turn off the unit.
The unit must be off for the timers to operate.
To
Action
change the settings
Repeat steps 1 to 4 and 6. 
change the source 
or volume
1) Press [
˚
PLAY/REC] to clear the timer 
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6. 
check the settings
(when the unit is on 
or in standby mode)
Press [CLOCK/TIMER] repeatedly to select 
˚
PLAY or 
˚
REC.
cancel Press 
[
˚PLAY/REC] to clear the timer 
indicators from the display.
Note
•  The play timer and record timer cannot be used together.
• The play timer will start at the preset time, with the volume 
increasing gradually to the preset level.
•  The record timer will start 30 seconds before the set time, with the 
volume muted.
•  The timer comes on at the set time every day if the timer is on.
•  The unit must be in the standby mode for the timer to function.
•  If you turn the unit off and on again while a timer is functioning, the 
fi nish time setting will not be activated.
•  If MUSIC PORT is selected as the source when the timer comes on, 
the system turns on and engages MUSIC PORT as the source. If 
you wish to playback or record from the portable audio equipment, 
activate the equipment’s play mode and increase the volume. (See 
the portable audio equipment’s instruction manual.)
PM45_E_EN.indd   11
PM45_E_EN.indd   11
3/7/07   9:16:06 AM
3/7/07   9:16:06 AM