Panasonic SC-HT70 Operating Guide

Page of 6
1
Attach the stickers to the speaker cords.
1
 – 
5
 : Attach stickers 1 to 5 to the cords of the 5 small speakers
              (2 
front, 2 
surround and 1 
center : SB-AFC80).
6
 : Attach sticker 6 to the cord of the large speaker 
      (Subwoofer : SB-W80A).
1
1
FRONT L
FRONT L
1
FRONT L
10 cm
FRONT
SURROUND
R
L
R
L
2
3
4
5
6
1
CENTER
SUBWOOFER
6
5
4
3
2
1
3
3
1
2
-
 Blue or black
+
 Gray or red
-
 Gray with blue stripe or black
+
 Gray (no stripe) or red
Connect the speakers to 
the unit.
Connect the cords so the numbers on 
the stickers match the numbers under 
the terminals. Be sure to follow the 
color-coding of the cords so the 
+
 cords 
are connected to the 
+
 terminals and 
the 
-
 cords are connected to the 
-
 
terminals.
30
°
30
°
120
°
1
2
5
3
4
6
2
Front (left)
Center speaker
Front (right)
Subwoofer
Surround 
(left)
Surround 
(right)
Position the speakers.
§
The front, center, and 
surround speakers 
should be placed at 
approximately the same 
distance from the 
listening position. The 
angles in the diagram 
are approximate.
 
6
 Subwoofer
5
 Center speaker
4
 Surround (right)
3
 Surround (left)
2
 Front (right)
1
 Front (left)
6
5
4
3
2
1
The numbers on the stickers determine the 
position and connection of each speaker.
These speakers are to be used 
exclusively with this system. Do not use 
them with any other system.
Note
RQCA0818
F0201YS0
Speaker set-up
The speaker system included is comprised of five small speakers with the same specifications
and one large speaker. Follow these instructions to place and connect the speakers correctly.
Instalación de
altavoces
El sistema de altavoces incluido consta de
cinco altavoces pequeños de idénticas
especificaciones y un altavoz grande. Siga
estas instrucciones para colocar y conectar
los altavoces correctamente.
Coloque los adhesivos en los cables
de los altavoces.
1
– 
5
:
Coloque los adhesivos 1 en 5 a los
cables de los parlantes pequeños 5
(2 
t
frontal, 2 
t
surround y 1 
t
central:
SB-AFC80).
6
: Coloque el adhesivo 6 en el cable del
altavoz grande
(Subwoofer: SB-W80A).
Los números de los adhesivos
determinan la posición y conexión de
cada altavoz.
1
Frontal (izquierdo)
2
Frontal (derecho)
3
Surround (envolvente) (izquierdo)
4
Surround (envolvente) (derecho)
5
Altavoz central
6
Subwoofer (altavoz de graves)
Posición de los altavoces.
1
Frontal (izquierdo)
2
Frontal (derecho)
3
Surround (envolvente) (izquierdo)
4
Surround (envolvente) (derecho)
5
Altavoz central
6
Subwoofer (altavoz de graves)
§
Los altavoces frontal, central y surround
deben estar colocados aproximadamente
a la misma distancia de la posición de
escucha. Los ángulos del diagrama son
aproximados.
Conecte los altavoces a la unidad.
Conecte los cables de modo que los
números de los adhesivos correspondan a
los números ubicados debajo de los
terminales. No olvide respetar la codificación
por color de los cables, de modo que los
cables 
+
estén conectados a los terminales
+
y los cables 
-
estén conectados a los
terminales 
-
.
+
Gris (sin franja) o rojo
-
Gris (con franja azul) o negro
+
Gris o rojo
-
Azul o negro
Se debe utilizar estos altavoces
exclusivamente con este sistema. No los use
con otro sistema.
Nota
3
2
1