Panasonic SC-BT100 Operating Guide
10
RQT9161
STEP
3
Setting up
Batteries
Insert so the poles (
i and j) match those in the remote
control.
When closing the lid, insert it from the
When closing the lid, insert it from the
j (minus) side.
≥Do not use rechargeable type batteries.
≥Do not mix old and new batteries.
≥Do not use different types at the same time.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to
direct sunlight for a long period of time with doors and
windows closed.
windows closed.
≥Do not take apart or short circuit.
≥Do not attempt to recharge alkaline or manganese batteries.
≥Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which
can damage items the fluid contacts and may cause a fire.
Remove batteries if the remote control is not going to be used
for a long period of time. Store in a cool, dark place.
can damage items the fluid contacts and may cause a fire.
Remove batteries if the remote control is not going to be used
for a long period of time. Store in a cool, dark place.
Use
When the system is switched on for the first time, a screen for the basic settings is displayed automatically. Follow the on-screen
prompts to make basic settings for the system.
prompts to make basic settings for the system.
Remote control
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
R6/LR6, AA
30˚
30˚
30˚
10˚
Remote control signal sensor
7 m directly in front of the unit
If you cannot operate the unit using the remote control after
changing the batteries, please re-enter the codes (
changing the batteries, please re-enter the codes (
>
42).
Easy Setting
1 Press [
Í].
Setup screen appears.
≥If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control
≥If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control
2 or HDAVI Control 3 via an HDMI cable, then the “On-screen Language” and
“TV Aspect” setting information on the TV are captured from the TV.
“TV Aspect” setting information on the TV are captured from the TV.
2 Follow the on-screen instructions and make the settings with
[
3, 4] and [OK].
“On-screen Language” (
>
35) and “TV Aspect” (
>
36) are set.
≥You can perform this setup anytime by selecting “Easy Setting” in the Setup menu.
(
>
34)
≥You can also change these settings individually. (
>
35, 36)
Set up the radio
Presetting the radio stations automatically
Up to 30 stations can be set.
1 Press [FM] to select “FM”.
2 Press and hold [OK].
2 Press and hold [OK].
Release the button when “M” begins to flash.
The tuner tunes to the lowest frequency and starts to
preset all the stations it can receive into the channels
in ascending order.
preset all the stations it can receive into the channels
in ascending order.
≥“SET OK” is displayed when the stations are set, and the radio tunes to the last
preset station.
≥“ERROR” is displayed when automatic presetting is unsuccessful. Preset the
channels manually (
>
11).
[
Í]
[OK]
[
[
3, 4]
[OK]
[FM]
96/24
M
D
D
D EX
+
NEO:6
PL x
HD
e.g., Display
SCBT100EGEB-RQT9161-B.book Page 10 Thursday, April 10, 2008 3:57 PM