Panasonic SC-BT100 Operating Guide

RQT9161

(Centre, surround and surround back speakers only)
1 Press [

3, 4, 2, 1] to 

select the speaker icon 
and press [OK].

2 Press [

3, 4] to select 

the setting and press 
[OK].

(Effective when playing multi-channel audio)
(Centre, surround and surround back speakers only)

For optimum listening with 7.1/5.1ch sound, all the speakers, 
except for the subwoofer, should be the same distance from 
the seating position. If you have to place the centre, surround 
and surround back speakers closer to the seating position, 
adjust the delay time to make up for the difference.

If either distance 

A or B is less than C, find the difference in 

the relevant table and change to the recommended setting.

:

Actual speaker position

:

Ideal speaker position

ABC: Primary listening distance

1 Press [

3, 4, 2, 1] 

to select the delay 
time box and press 
[OK].

2 Press [

3, 4] to 

select the setting and 
press [OK].

(Effective when playing multi-channel audio)

1 Select “Test” and press [OK].

A test signal is output.
Front (L) 

——

 

)

Centre

——)

Front (R)

 ——)

 Surround (RS)

:

;

Surround (LS)

(— 

Surround back (LB)

 (— 

Surround back (RB)

2 While listening to the test signal, press [

3, 4] to adjust the 

volume of each speaker.
Centre speaker: (

r6 dB to s6 dB)

Surround and Surround back speakers: (

r10 dB to s10 dB)

≥Set each speaker level according to the volume of the 

Front (L) and Front (R) speaker volume respectively.

3 Press [OK].

The test signal stops.

≥No signal is output for the subwoofer. To adjust its volume, 

see page 28, Adjusting speaker level during play.

∫ To finish the speaker setting

Press [

3, 4, 2, 1] to select “Complete” and press [OK].

Select when the centre speaker is 
connected and in use.

Select when the centre speaker is 
not connected or not in use.

Select when the surround speakers 
are connected and in use.

Select when the surround speakers 
are not connected or not in use.

§1

Select when 
–using the optional Panasonic 

wireless system SH-FX67 and 
speaker system SB-HS100A to 
enjoy 7.1ch surround sound.

– connecting an amplifier to the 

SURROUND BACK terminal at the 
back of this unit to enjoy 7.1ch 
surround sound.

Select when the surround back 
speakers are not connected or not in 
use.

§1

Surround back speakers are set to “

” by default.

§2

You can select “

” only when surround speakers are set 

to “

”.

§1

§2

A Centre speaker

B Surround/Surround back 

Difference

Setting

Approx. 34 cm 

1.0 ms

Difference

Setting

Approx. 170 cm 

5.0 ms

Approx. 68 cm 

2.0 ms

Approx. 102 cm 

3.0 ms

Approx. 340 cm 

10.0 ms

Approx. 136 cm 

4.0 ms

Approx. 510 cm 

15.0 ms

Approx. 170 cm 

5.0 ms

A

B

C

A

B

C

B

Approximate room dimensions

Circle of constant primary listening distance

SCBT100EGEB-RQT9161-B.book  Page 37  Thursday, April 10, 2008  3:57 PM