Panasonic SC-BT100 Operating Guide
42
RQT9161
Troubleshooting guide
Sound (Continued)
Page
Card
iPod operation
Radio
Other difficulties with playback
When other Panasonic products respond to this remote control
Change the remote control code on this unit and the remote control (the two must match) if you place other Panasonic products
close together.
close together.
No surround sound.
≥Press [ÎVS] to turn on Dolby Virtual Speaker.
≥Press [ÎPLIIx] to turn on Dolby Pro Logic IIx/Dolby Pro Logic II.
≥Press [NEO:6] to turn on DTS NEO:6.
29
29
29
29
29
Cannot switch audio.
≥There are discs for which audio cannot be changed because of how the disc was
created.
—
The capacity of the SD card
decreased.
decreased.
≥When a BD-Video that supports the virtual package is used, and an SD card is in
the slot, data may be written to the SD card. Erase the data by using “BD-Video
Data Erase”, format the card or use a new card.
Data Erase”, format the card or use a new card.
26
MPEG-2 motion pictures
and music on an SD card
cannot be played.
and music on an SD card
cannot be played.
≥Data that can be played from an SD card are AVCHD and JPEG data.
16
The contents of the card
cannot be read.
cannot be read.
≥The card is not compatible or the contents on the card may be damaged.
≥Turn off and then turn on the unit again.
15
—
Cannot charge or operate.
≥Check that the iPod is connected firmly.
≥The battery of the iPod is depleted. Charge the iPod, and then operate again.
22
—
Cannot display iPod videos/
photos on the TV.
photos on the TV.
≥Make sure that TV is connected to the VIDEO OUT or S VIDEO OUT terminal on
this unit.
≥Operate the iPod menu to make the appropriate video/photo output settings for
your TV. (Refer to operating instructions for your iPod.)
7
—
Distorted sound or noise is
heard. “ST” flickers or does
not light.
heard. “ST” flickers or does
not light.
≥Adjust the position of the antenna.
≥Use an outdoor antenna.
—
9
A beat sound is heard.
≥Turn the TV off or move it away from the unit.
—
Audio and video
momentarily pause.
momentarily pause.
≥This occurs between playlist chapters or scenes (
[AVCHD]
).
≥When playing a title recorded on both layers, the unit automatically switches between
layers and plays the title in the same way as a normal programme. However, video
and audio may momentarily cut out when the unit is switching layers.
and audio may momentarily cut out when the unit is switching layers.
—
—
—
BD-Video or DVD-Video is
not played.
not played.
≥Ensure the disc is for the correct BD-Video region code or DVD-Video region
number, and is not defective.
≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.
≥Some BD-Video can only be output with HDMI.
Cover
34
—
Picture-in-picture is not
played with BD-Video.
played with BD-Video.
≥Confirm whether the disc supports
picture-in-picture.
—
The virtual package is not
played with BD-Video.
played with BD-Video.
≥Confirm whether the disc supports the virtual package.
≥The inserted SD card does not have sufficient available capacity.
≥The SD card is write-protected.
≥Sub contents copied to an SD card are provided by the disc producer as a part of
the BD-Video content. Even if you record images and audio onto an SD card, it
cannot be played as a virtual package.
cannot be played as a virtual package.
26
—
15
26
26
Alternative soundtrack and
subtitles cannot be
selected.
subtitles cannot be
selected.
≥The languages are not recorded on the disc.
≥You may not be able to use the on-screen menu to change the soundtrack and
subtitles on some discs. Use the disc’s menus to make changes.
—
16, 26
No subtitles.
≥Subtitles are not recorded on the disc.
≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.
—
32
Angle cannot be changed.
≥Angles can only be changed during scenes where different angles are recorded.
—
The resume play function
does not work.
does not work.
≥Memorized positions are cancelled when
–pressing [
∫ STOP] several times.
–opening the disc tray.
≥The resume play function may not work depending on the disc.
—
—
1 Press [BD/SD] to select “BD/DVD/CD” or “SD”.
2 While stopped, press [SETUP].
3 Press [
2 While stopped, press [SETUP].
3 Press [
3, 4] to select “General” and press [OK].
4 Press [
3, 4] to select “Remote Control” and press
[OK].
5 Press [
3, 4] to select the code (1 or 2) and press
[OK].
6
To change the code on the remote control
While pressing [OK], press and hold the numbered
button ([1] or [2] ) for more than 5 seconds.
button ([1] or [2] ) for more than 5 seconds.
7 Press [OK].
When the following indicator
appears on the unit’s display
and you are unable to operate
the unit
appears on the unit’s display
and you are unable to operate
the unit
Press and hold [OK] and the
indicated number button at the
same time for more than
5 seconds.
indicated number button at the
same time for more than
5 seconds.
Set Code 1
Set Code 2
Remote Control
NOTE
D
R
The unit’s remote control code
e.g., Display
SCBT100EGEB-RQT9161-B.book Page 42 Thursday, April 10, 2008 3:57 PM