Panasonic SC-AK220 Operating Guide

Page of 16
RQT7531
4
(L)
Use a flat-head screwdriver to turn the voltage
selector on the rear panel to the appropriate
position for the area in which this system is used.
If the power supply in your area is 115 V or
120 V, please set the voltage selector as follows:
 For 115 V: Set to 110 V.
 For 120 V: Set to 127 V.
4
 
Voltage Selector (for South Africa 
    and Middle East only)
VOLT ADJ
(R)
AM loop antenna
1
2
2
 
AM loop antenna
Stand the antenna up on its base.
For Australia, New 
Zealand, South Africa
and Middle East
For Europe
1
2
1
 
FM indoor antenna
Tape the antenna where reception is best.
For Europe
Adhesive tape
FM indoor antenna
For Australia, New 
Zealand, South Africa
and Middle East
1
2
Set-up
Connect the AC mains lead only after all other connections have been made.
Preparation
Twist and pull off the vinyl tip of the antenna wires and speaker cords.
To household mains socket
5
AC mains lead
(For South Africa and Middle East only)
If the power plug does not fit your socket, use the
power plug adaptor (included).
 Note
 Note
 Note
The included AC mains lead is for use with this unit
only. Do not use it with other equipment.
For your reference
To save power when the unit is not to be used for a
long time, unplug it from the household AC outlet.
You will need to reset some memory items after
plugging in the unit.
Insertion of connector
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front part of
the connector may jut out as shown in the drawing.
However there is no problem using the unit.
Connector
Appliance inlet
Approx. 6 mm
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 2 BEFORE CONNECTION.
3
Speakers
Placement
Caution
• Use the speakers only with the recommended system. Failure
to do so may lead to damage to the amplifier and/or the
speakers, and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you experience a
sudden change in performance.
• Do not attach these speakers to walls or ceilings.
Speakers are designed identically so that
no left or right channel orientation is
necessary.
Use only the supplied
speakers.
The combination of the main
unit and speakers provide the
best sound. Using other
speakers can damage the unit
and sound quality will be
negatively affected.
Connection
Red (+)
Black
Red
Black (–)
1
3
2
Connect the left (L)
side in the same way.
 Note
Keep your speakers at least
10 mm away from the system
for proper ventilation.
These speakers do not have
magnetic shielding. Do not
place them near televisions,
personal computers or other
devices easily influenced by
magnetism.
You cannot take the front net
off the speakers.
ME
MO
RY