Panasonic KX-TD1232 User Manual

DPT Features

4-61

4.2

DPT Features

Display Call Information

When you have a call with an outside party, you can see the phone number or the
duration of a telephone call, the meter, the phone charge on the display by pressing the
CO button repeatedly.

When you make a call with an outside party;

• The display shows the telephone number that you are

calling.

When you receive a call from an outside party;

• The display shows the duration of a telephone call.

After receiving a signal of the telephone charge;

• The display changes to the charge.

1. Press the CO button.

• The display shows the meter.

2. Press the CO button again.

• The display returns to the telephone number that you are

calling or the duration of a telephone call.

Conditions

• Whenever you press the CO button, the display changes the phone number or the

duration of a telephone call, the meter, the phone charge in circular way.

• If you do not pay the telephone charge, your display does not change even if you

press the CO button.

• You can change the order of the display, the meter and the charge through System

Programming.

• Refer to the display examples in Section 9 for another display call information.

• If the displayed characters exceed sixteen digits, “&” is shown at the right-hand edge.

Programming References

• System Programming — Installation Manual

[117] Charge Display Selection

CO01 :£00000.23

CO01 :00001