Panasonic KX-TD1232 User Manual
4-114
DPT Features
P
4.2
DPT Features
Paralleled Telephone Connection
A proprietary telephone (PT) can be connected in parallel with a single line telephone
(SLT). This feature allows you to set whether the paralleled SLT will ring or not, when
an incoming call is received.
(SLT). This feature allows you to set whether the paralleled SLT will ring or not, when
an incoming call is received.
To ring or not to ring a paralleled SLT
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (69).
3. Dial 1 or 0.
- 1 : to ring
- 0 : not to ring
• You hear a confirmation tone and then a dial tone.
• The display shows:
— (when set to ring)
or
— (when not set to ring)
4. Hang up or press the SP-PHONE/MONITOR button.
Conditions
• The default is “Parallel Off (No ring).”
• The PT can be used to perform normal operations whether or not the SLT is set to ring.
• When receiving a call:
— If SLT is set to ring, then both the PT and the standard telephone will ring except
when the PT is in “Handsfree Answerback” mode or Voice-Calling mode with the
“Alternate Calling — Ring/Voice” feature.
“Alternate Calling — Ring/Voice” feature.
— If SLT is not set to ring, then only the PT rings. However, the SLT can answer the
call.
• When the SLT is in use, the display and the indicators of the PT will work in the same
way as if the PT is in use.
• If you go off-hook while your paralleled telephone is in use, the call will switch over to
your telephone, and vice versa.
• The “XDP*” feature is available.
Parallel On
Parallel Off
1
2
3
1
0
or
4
9
6