Panasonic KX-TD1232 User Manual

9-14

Nothing is heard in 
handsfree mode.

The unit does not ring.

The display blinks with the
following message:

“Headset” mode is
selected.

Ringer Volume is set to
“OFF.”

System internal clock
does not work properly.

When the headset is not used, set the
mode to “Handset.”
Refer to “Handset/Headset Selection” in
Station Programming (Section 2), or
“Initial Settings for the KX-T7400 / KX-
T7200 Series” (Section 1.1).

Set the Ringer Volume to a higher value.
Refer to “Initial Settings for the KX-
T7400 / KX-T7200 Series” (Section 1.1).

Consult with an authorised Panasonic
Factory Service Center.

Set Time & Date

1 Jan 12:00AM

1 Jan 1994 SAT

Your system enables conversations between specific CO lines and extensions (Power
Failure Transfer), and supports system data backup.

SLT are automatically connected straight to specific CO lines.  This provides CO line
conversations between SLTs and the following CO lines:

Up to three SLTs can be connected to CO1, CO2 and CO9 which are connected
to Power Failure Transfer jacks.

All the other conversations except for the above combinations are disconnected during
a power failure.

SLTs can work in the event of a power failure.  Connect them to the above jacks.

When the power restored after a power failure, your system automatically restarts its
operation keeping the previous system data as much as possible.