Panasonic KXTCD202FX Operating Guide
Preparation
10
Setting dialling mode
(tone/pulse)
(tone/pulse)
Change the dialling mode depending on
your telephone line service.
“Tone”: Select when you have a touch tone
service.
“Pulse”: Select when you have rotary or
pulse service.
your telephone line service.
“Tone”: Select when you have a touch tone
service.
“Pulse”: Select when you have rotary or
pulse service.
1
Press {j/OK}.
2
Select “Base Unit Setup”, then
press {>}.
press {>}.
3
Enter “0000” (default base unit PIN).
L
L
If you changed the PIN, enter it (page
26).
26).
4
Select “Call Options”, then press
{>}
{>}
.
5
Select “Dial Mode”, then press {>}.
6
Select the desired setting, then press
{>}
{>}
.
7
Press {ih}.
Setting the date and time
Important:
L
Confirm that the AC adaptor is connected.
L
Ensure that w is not flashing.
1
Press {j/OK}.
2
Select “Handset Setup”, then press
{>}
{>}
.
3
Select “Time Settings”, then press
{>}
{>}
.
4
Select “Set Date & Time”, then press
{>}
{>}
.
5
Enter the current day, month and year by
selecting 2 digits for each.
Example: 17 May, 2005
Press {1}{7} {0}{5} {0}{5}.
selecting 2 digits for each.
Example: 17 May, 2005
Press {1}{7} {0}{5} {0}{5}.
6
Enter the current hour and minute by
selecting 2 digits for each.
selecting 2 digits for each.
L
You can select “AM”, “PM” or 24-hour
time entry by pressing {*} repeatedly.
time entry by pressing {*} repeatedly.
Example: 3:30 PM
Press {0}{3} {3}{0}, then press {*}
repeatedly until “03:30 PM” is
displayed.
Press {0}{3} {3}{0}, then press {*}
repeatedly until “03:30 PM” is
displayed.
7
Press {j/OK}.
8
Press {ih}.
Note:
L
To correct a digit, press {<} or {>} to
move the cursor, then make the
correction.
move the cursor, then make the
correction.
L
The date and time may be incorrect after a
power failure. In this case, set the date
and time again.
power failure. In this case, set the date
and time again.
TCD200FX(e-e).book Page 10 Monday, February 7, 2005 1:19 PM