Klipsch RS-52 3481013052 Leaflet

Product codes
3481013052
Page of 1
RS-52
S P E C I F I C A T I O N S
FREQUENCY RESPONSE
62Hz-23kHz ± 3dB             
POWER HANDLING
100W RMS / 400W Peak            
SENSITIVITY
95dB @ 2.83V / 1m             
NOMINAL IMPEDANCE 
8 ohms compatible  
HIGH FREQUENCY DRIVERS
Dual 1" (2.54cm) Titanium diaphragm 
compression drivers mated to 90˚x 60˚ 
square Tractrix
®
Horns         
HIGH FREQUENCY CROSSOVER
1700Hz    
LOW FREQUENCY DRIVERS
Dual 5.25" (13.3cm) Cerametallic
cone woofers         
ENCLOSURE TYPE
Bass-reflex via dual side-firing ports          
HEIGHT
13" (33cm)            
WIDTH
12.6" (32cm)            
DEPTH
8.5" (21.6cm)     
MOUNTING
Keyhole bracket and Dual 1/4"-20 
threaded inserts              
WEIGHT
15 lbs (6.8kg)         
FINISH
Matte Black vinyl      
Dual 5.25" Surround Loudspeaker
Adopting a completely new cabinet and driver
layout that is similar to the Klipsch THX
®
Ultra2
KS-525-THX surround speaker, the RS-52
establishes greater output, improved coverage and
increased power handling to further extend
Klipsch’s best-in-class surround sound
performance.
Exclusive Tractrix
®
Horns have always been the
key component of the Reference Series. In the
RS-52, this technology has been refined to include
improved throat geometry for a more genuine,
lifelike sound. Behind the speaker’s dual horns lie
1-inch titanium tweeters with powerful
neodymium magnet motor structures to provide a
unique combination of precision, clarity and
effortless dynamics.
The RS-52 employs dual 5.25-inch woofers for a
solid bass foundation. These Cerametallic™
woofers with inverted copper dust caps exhibit a
very high stiffness-to-mass ratio and superb
damping characteristics. 
Klipsch Wide Dispersion Surround Technology™
(WDST) provides crystal-clear sonic detail even
in listening areas with less than ideal configurations.
The Tractrix Horns deliver a 90-degree wide by
60-degree high dispersion pattern. By aligning two
horns at 90-degrees with respect to each other,
WDST smoothly covers a 180-degree horizontal
arc. In other words, the surround sound is pointed
at you no matter where you are seated.  
While increased baffle ribbing around the horn
mouth dramatically improves acoustics across the
sonic range, the crossover utilizes Klipsch custom
internal wiring and the finest components to
provide signal purity and perfect driver integration. 
Available in a matte black vinyl finish, the RS-52
also features side-firing ports to eliminate
turbulence noise and back-panel keyholes and 1/4"
threaded inserts to simplify installation. A low-
diffraction, magnetically attached grille further
accentuates the elegance of this speaker.   
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2006
• High-performance surround speaker
• WDST
design for maximum coverage and ease of placement
• Clean, compact shape for minimal room intrusion