Panasonic KXTGJ324E Operating Guide
2
Enter the base unit PIN (default: “0000”).
R If you forget your PIN, see page 51.
R If you forget your PIN, see page 51.
3
MbN: Select the handsets to be restricted.
a MSELECTN
R “ ” is displayed next to the selected
a MSELECTN
R “ ” is displayed next to the selected
handset numbers.
R To cancel the selected handsets:
MbN: Select the handset. a Press
MSELECTN again. “ ” disappears.
MSELECTN again. “ ” disappears.
4
MOKN
5
MbN: Select a memory location. a MOKN
6
Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
MOFFN
be restricted (8 digits max.). a MOKN a
MOFFN
Enhancing security for phone
calls
calls
You can increase the security of phone
conversations by setting this feature to
“Enhanced”. When “Enhanced” is selected,
conversations by setting this feature to
“Enhanced”. When “Enhanced” is selected,
is displayed. The default setting is
“Normal”.
1
MMENUN (right soft key) #729
2
MbN: Selected the desired setting. a MOKN
3
MOFFN
Note:
R If you set repeater mode to “On”
R If you set repeater mode to “On”
(page 36):
– Security is set to “Normal” and
– Security is set to “Normal” and
is
displayed.
– “Security” is not displayed in the
display menu (page 27).
R When enhanced security is enabled, sound
may cut in and out during conversations.
Changing the base unit PIN
Important:
R If you change the PIN (Personal
R If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 51.
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 51.
1
MMENUN (right soft key) #132
2
Enter the current 4-digit base unit PIN
(default: “0000”).
(default: “0000”).
3
Enter the new 4-digit base unit PIN. a
MOKN
MOKN
4
MbN: “Yes” a MOKN a MOFFN
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R The additional handset model
base unit.
Important:
R The additional handset model
recommended for use with this unit is noted
on page 4. If another handset model is
used, certain operations may not be
available.
on page 4. If another handset model is
used, certain operations may not be
available.
Additional base units
Handsets can be registered to up to 4 base
units, allowing you to add additional base units
and extend the area in which your handset(s)
can be used. If a handset moves out of range
of its base unit when “Auto” is selected on
base unit (page 36), it looks for another
base unit to make or receive calls. A base unit
and the handsets it communicates with is
called a “radio cell”.
Note:
R Calls are disconnected when the handset
units, allowing you to add additional base units
and extend the area in which your handset(s)
can be used. If a handset moves out of range
of its base unit when “Auto” is selected on
base unit (page 36), it looks for another
base unit to make or receive calls. A base unit
and the handsets it communicates with is
called a “radio cell”.
Note:
R Calls are disconnected when the handset
moves from one radio cell to another.
Registering a handset to a base
unit
unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
is displayed even when the handset is
near the base unit), re-register the handset.
1
Handset:
MMENUN (right soft key) #130
MMENUN (right soft key) #130
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
35
Programming
TGJ32xE(en)_0305_ver011.pdf 35
2015/03/05 14:31:40