Panasonic KX-P7510 Operating Guide
108
Care and Maintenance
5
If the outer casing or the MP tray are dirty, clean them with a soft, clean
cloth, slightly dampened with any mild commercial cleaner.
cloth, slightly dampened with any mild commercial cleaner.
C
AUTION
•
Do not use benzine, thinner, aerosol cleaners, or any abrasive powder.
•
Avoid damaging the sensor lever by touching it.
6
Replace the toner cartridge, close the top cover, plug in the power cord, and
turn the printer on.
turn the printer on.
To obtain high quality from your printer, clean the LSU when the image has the light vertical lines
running through them.
running through them.
1
Turn the printer off, open the top cover and remove the toner cartridge.
2
Pull up on the LSU cleaner and put it on the LSU.
Cleaning LSU (Laser Scanning Unit)
Sensor lever
MP tray