Panasonic KX-P7510 Operating Guide
136
Options
You must remove the printer cover from the right of the KX-P7500 Series in order to install following
options.
options.
•
DRAM SIMM
•
PS SIMM
•
Network Card for Ethernet*
•
IrDA/RS-232C Interface Card
*Network Card for Ethernet has been installed in the KX-P7510 printer.
I
MPORTANT
•
To prevent static electricity damage to any of the following components, touch a grounded metal
surface, such as the printer’s bare metal frame prior to touching the component.
– The interface connectors; parallel, optional network, RS-232C and IrDA
– Electrical components, connectors inside the printer, any components on the optional board
surface, such as the printer’s bare metal frame prior to touching the component.
– The interface connectors; parallel, optional network, RS-232C and IrDA
– Electrical components, connectors inside the printer, any components on the optional board
(DRAM SIMMs, PS SIMM, IrDA/RS-232C Interface Card, or Network Card for Ethernet)
– The connector pins on the optional 2nd feeder for the printer
C
AUTION
•
Do not remove the components which are not indicated.
To remove the printer cover:
1
Turn the printer OFF and pull out the 1st cassette.
Removing and replacing the printer cover
1st cassette