Panasonic KX-P7510 Operating Guide

Set the source item in the properties window to “Manual Feed” or “MP Tray” 
(see 

— To print continuously from the MP tray, set the source item to MP Tray.

— To print a sheet of paper from the MP tray, set the source item to Manual Feed.

Select “Thick” from Paper Type List Box of the printer driver.

•

Do not use an envelope curled down side, refer to the figure left below.

•

When wrinkle occurs, try printing with the envelope flap tucked in as shown right below.

To load envelopes into the OPT cassette, see 

Labels automatically feed from the MP tray.

•

About the available labels, see 

•

Use full label sheet. Partial sheets may cause labels to peel off during printing, resulting in a 
paper jam.

•

Avoid printing labels if the temperature is too high; doing so may damage consumables. The 
adhesive material should be stable at 205°C (400°F), the printer’s maximum temperature.

•

Do not use labels that have the backing sheet exposed.

•

Do not print on both sides of labels.

•

Select “Thick” from Paper Type List Box of the printer driver.

You cannot load labels from the cassettes. Use the MP tray for loading labels.