HP DL180 G6, Configure-to-order 507168-B21 User Manual

3G SAS (Serial Attached SCSI)

1.5G SATA (Serial ATA)

1 internal/1 external (Mini-SAS) x8 wide port connectors

DDR-2/533 MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s maximum
bandwidth.

x8 2.5G PCIe 2.0 provides 2GB/s maximum bandwidth.

x8 3G SAS provides 2.4GB/s maximum bandwidth.

40-bit 256MB ECC protected cache; transportable with battery-backed
upgrade.

NOTE: The 256MB cache is not battery-backed or transportable.

Logical Drives Supported Up to 32 logical volumes

Host Memory Addressing 64-bit, supporting greater than 4GB server memory space

RAID 6, 6+0 (Advanced Data Guarding)

NOTE: A minimum of 256 MB cache, battery kit, and Smart Array Advanced
Pack License Key upgrade is required to enable RAID 6, 6+0

RAID 5, 5+0 (Distributed Data Guarding)

NOTE: The 256 MB & Battery Kit upgrade is required to enable RAID 5, 5+0
support

RAID 1, 1+0 (Striping & Mirroring)
RAID 0 (Striping)

6Gb/s SAS (Serial Attached SCSI)

3Gb/s SATA (Serial ATA)

2 internal (Mini-SAS) x8 wide port connectors

DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s maximum
bandwidth.

x8 2.5G PCIe 2.0 provides 2GB/s maximum bandwidth

x8 6Gb/s SAS provides 24.8GB/s maximum bandwidth

40-bit 256MB ECC protected cache (72-bit 512MB BBWC module upgrades
available); transportable with battery-backed upgrade

Logical Drives Supported Up to 64 logical drives

Host Memory Addressing 64-bit, supporting greater than 4GB server memory space

RAID 6, 6+0 (Advanced Data Guarding)

NOTE: The minimum of 256 MB cache, battery kit, and Smart Array Advanced
Pack License Key upgrade is required to enable RAID 6, 6+0

RAID 5, 5+0 (Distributed Data Guarding)

NOTE: The 256 MB is required to enable RAID 5, 5+0 support of the Smart
Array P410i

RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)

Technical Specifications

DA - 13248   North America — Version 53 — September 24, 2012

Page  55