Panasonic SC-AK27 Operating Guide
25
Recording operations
RQT4708
1
2
3
4
1
2
4
4
3
2
The recording level and the Dolby effect (except for SC-AK17 models
and SC-AK27 Australia and New Zealand model) will be recorded as
they are on the tape being played back.
and SC-AK27 Australia and New Zealand model) will be recorded as
they are on the tape being played back.
1
Press [TAPE].
2
Press [
c
OPEN] on both decks and insert the tapes.
For playback: Into deck 1
For recording: Into deck 2
Close the holders by hand.
Tape direction is automatically set to “
For recording: Into deck 2
Close the holders by hand.
Tape direction is automatically set to “
3
”.
3
Press [REV MODE] to select the reverse mode.
Every time you press the button:
: One side is recorded, then recording stops auto-
matically.
,
: Both sides (front side
→
reverse side) are recorded,
then recording stops automatically.
4
Press [TAPE EDIT] to start recording.
•
If you selected “
” in step
3
, the direction will
automatically change to “
” when recording starts.
To stop recording:
Press [
Press [
L
].
Both decks will stop.
To start recording on the reverse side
Load a tape and change the tape direction as following.
1. Press [TAPE DECK 1/2] and select tape deck 2.
2. Press [
Load a tape and change the tape direction as following.
1. Press [TAPE DECK 1/2] and select tape deck 2.
2. Press [
/
] and immediately thereafter [
L
]. The tape direction will
be shown as “
4
”.
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
Before recording, advance the tape to the point from where you want
to start recording.
Tape-to-tape recording
Tape direction of the tape
you are recording onto
you are recording onto