Panasonic SC-AK27 Operating Guide
28
Sound quality/sound field operations
RQT4708
1
2
1
2
1
2
Varying the sound quality with the
manual equalizer
Dial [SOUND EQ] to display “MANUAL”.
When it is turned clockwise, the settings are selected in the
following sequence.
following sequence.
1
HEAVY
2
CLEAR
3
SOFT
4
DISCO
5
LIVE
6
HALL
7
MANUAL
8
AI EQ
9
FLAT
The SOUND EQ lamp lights more brightly, and “FLAT” is cleared.
Operate [SOUND EQ] jogcap and set the sound
quality as desired.
quality as desired.
1
← →
direction:
For selecting the range of the sound to
be adjusted
be adjusted
Characteristics of each sound range
Under 100 Hz:
Under 100 Hz:
Super woofer range
Around 330 Hz:
Bass to midrange
Around 1 kHz:
Midrange
Around 3.3 kHz:
Midrange to treble
Above 10 kHz:
Treble
2
↓ ↑
direction:
For adjusting the level (7 steps)
When the level is in the center, the dot flashes rapidly.
Repeat steps
Repeat steps
1
and
2
to set the desired sound quality.
The original display is restored on the display panel in about 5
seconds.
seconds.
To release the equalizer
Dial [SOUND EQ] to display “FLAT”.
Dial [SOUND EQ] to display “FLAT”.
Notes
•
The sound quality setting is stored automatically. It is recalled
when “MANUAL” is next selected.
when “MANUAL” is next selected.
•
All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.
sound quality setting has been selected.