Panasonic Sa-xr57 Operating Guide
35
RQT8549
Be
fore
u
se
• Even if the AC power supply cord is disconnected from the household AC outlet, the stations remain in the memory for approximately
two weeks.
Preset tuning
Presetting stations
n
Auto presetting
1
Set the channel reception to FM 87.9 MHz or
AM 530 kHz. (ápage 34)
AM 530 kHz. (ápage 34)
Preset channels that are automatically assigned by this unit are:
FM: 1 to 30
AM: 21 to 30
Preset the FM stations first. If the AM stations are preset before the
FM stations, they will be erased when the FM stations are preset.
2
Enter the menu.
Press
3
Select “TUNER ” and confirm the setting.
4
Select “AUTO MEMO ” and confirm the setting.
5
Select “START ” and press [ENTER].
Select “
CANCEL ” to cancel.
• During automatic presetting, the memory indicator (
) flashes
and the frequency scrolls. The memory indicator and channel
numbers are displayed for a second when a station is preset.
numbers are displayed for a second when a station is preset.
• The last station to be preset is displayed when presetting finishes.
• Frequencies may not be preset correctly when broadcast waves are
• Frequencies may not be preset correctly when broadcast waves are
too strong or too weak. In such cases, carry out presetting manually.
n
Manual presetting
1
Tune to the station you want to preset.
(ápage 34)
(ápage 34)
2
Enter the menu.
Press
3
Select “TUNER ” and confirm the setting.
4
Select “MEMORY ” and confirm the setting.
5
Select a channel number and press [ENTER].
“
STORED ” is displayed.
• To continue presetting, press [TUNE 2 or 1] to tune
another station from step 1.
6
Press [-MENU, –SETUP, RETURN] 2 times to
select “EXIT ” and press [ENTER].
select “EXIT ” and press [ENTER].
• FM stations can also be preset in the MONO mode
(á below).
MENU
SETUP
RETURN
M
MENU
SETUP
RETURN
Listening to preset stations
n
On the remote control
• Select the channel.
• Press the numbered buttons to select the channel.
To select a two digit number
e.g. 21: [ ≧ 10, ENTER] → [2] → [1]
e.g. 21: [ ≧ 10, ENTER] → [2] → [1]
n
On the main unit
1
Enter the menu.
Press
2
Select “TUNER ” and confirm the setting.
3
Select “TUNE MODE ” and confirm the setting.
4
Select “PRESET ” and confirm the setting.
5
Press [-MENU, –SETUP, RETURN] 2 times to
select “EXIT ” and press [ENTER].
6
Select the channel.
Press
• Hold down the button to change channels faster.
Select “MANUAL ” in step 4 when you wish to perform manual tuning (á page 34).
CH
0
ENTER
MENU
SETUP
RETURN
TUNE
Reducing excessive noise (on the main unit)
Select if noise is excessive during radio reception.
Preparation: Press [-MENU, –SETUP, RETURN] to enter the menu.
n
During FM stereo reception
You can improve FM reception by switching reception to monaural.
1
Select “TUNER ” and confirm the setting.
2
Select “FM MODE ” and confirm the setting.
3
Select “MONO ” and confirm the setting.
• When this is set, “
MONO” appears on the display.
• Select “
AUTO ” to cancel.
4
Press [-MENU, –SETUP, RETURN] 2 times to
select “EXIT ” and press [ENTER].
select “EXIT ” and press [ENTER].
n
During AM reception
When there is a lot of noise interference with an AM broadcast,
try switching to this mode.
try switching to this mode.
1
Select “TUNER ” and confirm the setting.
2
Select “BEAT PROOF ” and confirm the setting.
3
Select “MODE 1 ” or “MODE 2 ” and confirm
the setting.
4
Press [-MENU, –SETUP, RETURN] 2 times to
select “EXIT ” and press [ENTER].
Th
e radi
o
Ope
rations