Panasonic SC-AK640 Operating Guide
5
RQT8043
RQTV0071
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ENGLISH
Step 2
Step 2
- Inserting batteries into the remote control
- Inserting batteries into the remote control
AA/R6/LR6
■ Batteries
• Insert so the poles (+ and –) match those in the remote control.
• Remove if the remote control is not going to be used for a long period of time.
• Insert so the poles (+ and –) match those in the remote control.
• Remove if the remote control is not going to be used for a long period of time.
Store in a cool, dark place.
• Replace if the unit does not respond to the remote control even when held
close to the front panel.
• Do not use rechargeable type batteries.
• Mishandling of batteries in the remote control can cause electrolyte leakage,
• Mishandling of batteries in the remote control can cause electrolyte leakage,
which may cause a fi re.
• If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any part of
Wash thoroughly with water if electrolyte comes in contact with any part of
your body.
Do not:
• mix old and new batteries.
• use different types at the same time.
• heat or expose to fl ame.
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
• put heavy objects on the remote control.
• spill liquids onto the remote control.
• mix old and new batteries.
• use different types at the same time.
• heat or expose to fl ame.
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
• put heavy objects on the remote control.
• spill liquids onto the remote control.
■ Use
Aim at the remote control sensor, avoiding obstacles, at a maximum range
Aim at the remote control sensor, avoiding obstacles, at a maximum range
of 7 m (23 feet) directly in front of the unit.
Refer to page 6 for the remote control sensor position.
Step 3
Step 3
- DEMO function
- DEMO function
When the unit is fi rst plugged in, a demonstration of its functions may be shown
on the display.
If the demo setting is off, you can show a demonstration by selecting “DEMO
ON”.
on the display.
If the demo setting is off, you can show a demonstration by selecting “DEMO
ON”.
Press and hold [DISPLAY, –DEMO].
The display changes each time the button is held down.
NO DEMO (off)
The display changes each time the button is held down.
NO DEMO (off)
Ô DEMO ON (on)
While in standby mode, select “NO DEMO” to reduce power consumption.
Note:
DEMO function cannot be turned on when DIMMER is on.
Placement of speakers
Tweeter
Tweeter
Subwoofer
Front speaker
(right)
Front speaker
(left)
Main
unit
Place the
subwoofer on the
fl oor or a sturdy
shelf so that it will
not cause vibration.
subwoofer on the
fl oor or a sturdy
shelf so that it will
not cause vibration.
Front speakers
• Place the front speakers so that the tweeter is on the
• Place the front speakers so that the tweeter is on the
inside.
• You cannot take the front net off the speakers.
Use only the supplied speakers.
The combination of the main unit and speakers provide the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.
The combination of the main unit and speakers provide the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.
Note:
• Keep your speakers at least 10mm (
13
/
32
˝) away from the system for
proper ventilation.
• These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
infl uenced by magnetism.
infl uenced by magnetism.
• You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
• Reduce the volume in the following cases to avoid damage.
– When playing distorted sound.
– When adjusting the sound quality.
– When playing distorted sound.
– When adjusting the sound quality.
Caution
• Use the speakers only with the
• Use the speakers only with the
recommended system. Failure to do so
can damage the amplifi er and speakers,
and can cause fi re. Consult a qualifi ed
service person if damage occurs or
if a sudden change in performance is
apparent.
can damage the amplifi er and speakers,
and can cause fi re. Consult a qualifi ed
service person if damage occurs or
if a sudden change in performance is
apparent.
• Do not attach these speakers to walls
or ceilings.
RQTV0071-P_1EN.indd 5
RQTV0071-P_1EN.indd 5
11/22/05 3:34:56 PM
11/22/05 3:34:56 PM