Panasonic RXD45EB Operating Guide

RQTX1147

Using the clock and timers

Setting the clock

This is a 24-hour clock.

Press [CLOCK/TIMER].
Each time you press the button:

# PLAY ON

SLEEP

CLOCK

Original display

Within 5 seconds or so
Press [– /

2] or [6/+] to set the time.

Holding down the button will speed up the time selection.

Press [CLOCK/TIMER] to fi nish setting the time.

Displaying the clock
Press [CLOCK/TIMER] to display the clock for few seconds.

✒

Note

• Reset the clock regularly to maintain accuracy.
• When the unit is in standby mode and it is powered by

batteries, clock will not be displayed.

Using the play timer

You can set the timer to come on at a certain time to wake you
up.

✒

Preparation

• Turn the unit on and set the clock.
• Prepare the music source you want to listen to; disc or radio

source, and set the volume.

Press [CLOCK/TIMER] repeatedly to select the play
timer.

Within 5 seconds or so
Press [– /

2] or [6/+] to set the starting time.

Press [CLOCK/TIMER] to confi rm.

Repeat steps 2 and 3 to set the fi nishing time.

To activate the timer

Press and hold [–

# PLAY] to turn on the timer.

# PLAY No display (off)

Press [TAPE/OFF] to turn off the unit.

Change the
settings

Repeat steps 1 to 4 and 6 (

Z see above).

Change the
source or
volume

1. Press and hold [–

# PLAY] to clear the

timer indicator from the display.

2. Make changes to the source or volume.
3. Perform steps 5 and 6 (

Z see above).

Check the
settings
(when the
unit is on or in
standby mode)

Press [CLOCK/TIMER] repeatedly to
select

# PLAY.

Cancel

Press and hold [–

# PLAY] to clear the

timer indicator from the display.

Using sound effects

Changing the sound quality: Sound EQ

Press [SOUND EQ] repeatedly to select your desired
setting.

EQ1 (HEAVY)

Adds punch to rock

EQ2 (CLEAR)

Clarifi es higher frequencies

EQ3 (SOFT)

For background music

EQ4 (VOCAL)

Adds gloss to vocal

EQ OFF

Cancels the EQ selection

Maintenance

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a
soap-and water solution or a weak detergent solution.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions

that came with the cloth carefully.

Care of tape deck’s heads

Clean the heads regularly to ensure good quality playback and
recording. Use a cleaning tape (not included).

✒

Note

• The play timer will start at the preset time, with the volume

increasing gradually to the preset level.

• The timer comes on at the set time every day if the timer is

on.

• The unit must be in the standby mode for the timer to

function.

• If you turn the unit off and on again while a timer is

functioning, the fi nish time setting will not be activated.

Using the sleep timer

This function enables you to turn off the unit automatically after
the set time except in tape mode.

Press [CLOCK/TIMER] repeatedly to select “SLEEP”.

Press [– /

2] or [6/+] to select your desired time

(in minutes).

To cancel
Press [CLOCK/TIMER] repeatedly to show the remaining time,
and press [–/

2] or [6/+] to select “OFF”.

Changing the remaining time
Press [CLOCK/TIMER] repeatedly to show the remaining time,
and press [–/

2] or [6/+] to select your desired time.

✒

Note

• The play and sleep timer can be used together.
• The sleep timer always has priority. Be sure not to overlap

timer settings.

RQTX1147-1B_gb.indd 7

3/30/2010 10:24:13 AM