Panasonic SA-XR700 Operating Guide
37
RQT8739
See page 34 for receiver operations.
Changing the digital
input settings
input settings
• Change these settings to
suit the connections you
have made to the digital
input terminals.
• You can only allocate one
piece of equipment per
terminal.
Example: “OPT 1 ” becomes
the only digital terminal you
can use for connecting the
DVD player to the unit when
you change the DVD setting
to the terminal.
1 Select and confirm the choice.
2 Select the equipment connected to the digital
input terminal and confirm the choice.
3 Change the digital input setting and confirm the
choice.
Repeat steps 2 and 3 to change settings.
TV :
TV
DVR : DVD recorder
DVD : DVD player
CD :
CD player
Factory setting:
TV ;
OPT1 (OPTICAL1)
DVR ; OPT2 (OPTICAL2)
DVD ; COAX1 (COAXIAL1)
CD ;
COAX2 (COAXIAL2)
Setting input signals
• You can fix the signal type
(digital, analog or PCM)
supplied by such equipment
as the DVD recorder and the
DVD player or make the unit
identify the input signal
type.
supplied by such equipment
as the DVD recorder and the
DVD player or make the unit
identify the input signal
type.
• Select “AUTO ” when it is
not necessary to fix the
signal.
signal.
1 Select and confirm the choice.
2 Select the equipment connected to the digital
input terminal and confirm the choice.
3 Select the method for identifying input signals
and confirm the choice.
Repeat steps 2 and 3 to change settings.
PCM FIX mode
• In rare cases, the unit may have trouble recognizing the digital
• In rare cases, the unit may have trouble recognizing the digital
signals on discs.
• Use this mode when, for example, the beginning of a playing CD
track is cut off.
• You do not need to set the mode when playback is normal.
• When PCM FIX mode is on, the unit cannot process other signals.
• When PCM FIX mode is on, the unit cannot process other signals.
Cancel the mode when noise occurs.
TV :
TV
DVR : DVD recorder
DVD : DVD player
CD :
CD player
AUTO :
Automatic identification of digital
and analog signals (HDMI takes
priority when the input signal is
digital.)
ANALOG :
Fixes the input signal to analog.
DIG :
Fixes the input signal to digital.
PCMFIX :
Fixes the input signal to PCM.
Factory setting:
Factory setting:
TV, DVR ,DVD, CD ; AUTO
• “
DIGITAL INPUT” stays on the display when you fix the input signal as digital.
• “
PCM” appears on the display when you set the input signal as “PCMFIX ”.
• “
PCM FIX ” flashes on the display when the unit is in the PCM FIX mode and a non-PCM source
is input through digital (OPTICAL or COAXIAL) connections.
Reducing standby
power consumption
(power saving standby
mode)
mode)
1 Select and confirm the choice.
2 Select and confirm the choice.
3 Select and confirm the choice.
OFF :
When you wish to reduce
standby power consumption
ON :
When you activate the standby
through function (standby power
consumption becomes 0.7 W in
this setting)
Factory setting:
Factory setting:
ON
When you select “
OFF ”, the following becomes applicable.
• Standby power consumption becomes 0.3 W.
• Standby through with HDMI connections (á page 7) does not work.
• Ez Sync HDAVI Control (á page 13) is canceled (when the unit is off).
• Standby through with HDMI connections (á page 7) does not work.
• Ez Sync HDAVI Control (á page 13) is canceled (when the unit is off).
Setting the unit against
Ez Sync HDAVI Control
Ez Sync HDAVI Control
• You can set the unit against
EZ Sync HDAVI Control
when compatible TV
(VIERA) and DVD recorder
(DIGA) are connected.
when compatible TV
(VIERA) and DVD recorder
(DIGA) are connected.
1 Select and confirm the choice.
2 Select and confirm the choice.
3 Select and confirm the choice.
OFF :
When not using EZ Sync HDAVI
Control
ON :
When using EZ Sync HDAVI
Control
Factory setting:
Factory setting:
ON
Note
Note
Setti
ng
s
Ope
rations