Panasonic SA-XR700 Operating Guide
49
RQT8739
Help message
Specifications (IHF’78)
n
AMPLIFIER SECTION
Rated minimum sine wave RMS power output
20 Hz-20 kHz both channels driven
0.09 % total harmonic distortion
100 W per channel (6 Ω)
1 kHz continuous power output both channels driven
0.09 % total harmonic distortion
105 W per channel (6 Ω)
Total harmonic distortion
rated power at 20 Hz-20 kHz
0.09 % (6 Ω)
Power bandwidth
both channels driven, –3 dB
4 Hz to 88 kHz (6 Ω, 0.9 %)
Power output each channel driven
0.9 % total harmonic distortion at 1 kHz
Front (L/R)
100 W (6 Ω)
Center
100 W (6 Ω)
Surround (L/R)
100 W (6 Ω)
Surround Back (L/R)
100 W (6 Ω)
Load impedance
Front (L/R)
A or B
6 to 8 Ω
A and B
6 to 8 Ω
BI-WIRE
6 to 8 Ω
Center
6 to 8 Ω
Surround (L/R)
6 to 8 Ω
Surround Back (L/R)
6 to 8 Ω
Frequency response
CD, AUX, TV/STB, VCR, DVD RECORDER, BD/DVD PLAYER 4 Hz to 88 kHz, ±3 dB
DVD 6CH
4 Hz to 44 kHz, ±3 dB
Input sensitivity
CD, AUX, TV/STB, VCR, DVD RECORDER, BD/DVD/DVD 6CH 27 mV (200 mV, IHF ’66)
Input impedance
CD, AUX, TV/STB, VCR, DVD RECORDER, BD/DVD/DVD 6CH
22 kΩ
S/N (IHF A)
CD, TV/STB, BD/DVD PLAYER, DVD RECORDER (Digital Input)
85 dB (103 dB, IHF ’66)
Tone controls
BASS
50 Hz, +10 to –10 dB
TREBLE
20 kHz, +10 to –10 dB
Subwoofer frequency response (– 6 dB)
7 Hz to 200 Hz
n
FM TUNER SECTION
Frequency range
87.9 to 107.9 MHz
Sensitivity
11.2 dBf (2 µV, IHF ’58)
50 dB quieting sensitivity
MONO
18.3 dBf (4.5 µV, IHF ’58)
STEREO
38.3 dBf (45 µV, IHF ’58)
Total harmonic distortion
MONO
0.2 %
STEREO
0.3 %
S/N
MONO
73 dB
STEREO
67 dB
Frequency response
20 Hz to 15 kHz, +1 dB, –2 dB
Alternate channel selectivity
65 dB
Capture ratio
1.5 dB
Image rejection at 98 MHz
40 dB
Spurious response rejection at 98 MHz
75 dB
AM suppression
50 dB
Stereo separation
1 kHz
40 dB
10 kHz
30 dB
Antenna terminal
75 Ω (unbalanced)
n
AM TUNER SECTION
Frequency range
530 to 1710 kHz
Sensitivity
20 µV, 330 µV/m
Selectivity
55 dB
IF rejection at 1000 kHz
50 dB
n
VIDEO SECTION
Output voltage at 1 V input (unbalanced)
1±0.1 Vp-p
Maximum input voltage
1.5 Vp-p
Input/output impedance
75 Ω
S-Video
Input
BD/DVD PLAYER, DVD RECORDER, TV/STB
Output
TV MONITOR
Component Video
Input
DVD RECORDER, TV/STB
Output
TV MONITOR
n
GENERAL
Power supply
AC 120 V, 60 Hz
Power consumption
140 W
Dimensions (W x H x D)
430 mm x 107.5 mm x 390 mm
(16-15/16'' x 4-7/32'' x 15-11/32'')
Mass
Approx. 5.3 kg (11.7 lb.)
n
DIN POWER
1 kHz, T. H. D. 1 %
2 x 100 W (6 Ω)
Notes:
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
Message
Cause/countermeasure
1
Muting is on.
Press [MUTING] on the remote
control to cancel the function
(á page 31).
Press [MUTING] on the remote
control to cancel the function
(á page 31).
2
The selected mode is not “
MUSIC ”.
Change the mode to “
MUSIC ”
(á pages 28 and 29).
3
Center and surround speakers are
not connected, or they are set as
absent. Connect the speakers
(á page 9) or change their setting
to present (á page 35).
not connected, or they are set as
absent. Connect the speakers
(á page 9) or change their setting
to present (á page 35).
4
Surround and surround back
speakers are not connected, or
they are set as absent. Connect
the speakers (á page 9) or change
their setting to present
(á page 35).
speakers are not connected, or
they are set as absent. Connect
the speakers (á page 9) or change
their setting to present
(á page 35).
5
Surround back speakers are not
connected, or they are set as
absent. Connect the speakers
(á page 9) or change their setting
to present (á page 35).
connected, or they are set as
absent. Connect the speakers
(á page 9) or change their setting
to present (á page 35).
Message
Cause/countermeasure
6
You are trying to use the effect
unavailable for DTS-ES sources.
unavailable for DTS-ES sources.
7
You are trying to use the effect
unavailable for DVD-Audio sources.
unavailable for DVD-Audio sources.
8
You are trying to use the effect
unavailable for DVD analog
6-channel playback.
unavailable for DVD analog
6-channel playback.
9
You are trying to use the effect
unavailable for the current input
source.
unavailable for the current input
source.
10
(flashing)
The unit is in the “
PCMFIX ” mode.
Cancel this mode (á page 37).
11
“SPEAKERS A” is off. Select
“SPEAKERS A” (á pages 12 and
26).
“SPEAKERS A” (á pages 12 and
26).
12
“SPEAKERS A” and “SPEAKERS
B” are off. Select “SPEAKERS A”
or “SPEAKERS B” (á pages 12, 26
and 27).
B” are off. Select “SPEAKERS A”
or “SPEAKERS B” (á pages 12, 26
and 27).
Digital input
(OPTICAL)
2
(COAXIAL)
2
HDMI (Version 1.2a)
Input
2
Output
1
Power consumption in standby mode:
0.7 W
Power consumption in HDMI off mode:
0.3 W
Marking sign is located on bottom of the unit.
Troubleshooting g
u
id
e/
Help
me
ssage/Specif
ica
tions
Re
fe
re
nc
e