Panasonic SA-XR700 Operating Guide
21
RQT8743
Connections
E
N
GL
ISH
Connecting antennas
(CD)
CD
DVD 6CH IN
BD/DVD/
AU
LOOP
EXT
AM ANT
FM ANT
DIGITAL IN
(BD/
DVD PLAYER)
(DVD RECODER)
(TV/STB)
OPTICAL1 OPTICAL2 COAXIAL1 COAXIAL2
LOOP ANT
GND
(BD/DVD PLAYER) IN
OUT
OUT
OUT
IN
IN
IN
SUBWOOFER SURROUND
FRONT
IN
IN
DVD RECORDER
TV MONITOR
TV MONITOR
TV/STB
CENTER
BD/
DVD PLAYER
BD/
DVD PLAYER
(DVD RECORDER) IN
R
L
S VIDEO
75
1
2
FM ANT
FM ANT
1
3
2
Black
Red
White
AM loop antenna (included)
Keep the antenna cord away
from DVD recorders, DVD
players, and other cords.
Keep the antenna cord away
from DVD recorders, DVD
players, and other cords.
FM indoor antenna
(included)
Fix the other end of
the antenna where
reception is best.
(included)
Fix the other end of
the antenna where
reception is best.
To connect a 75 Ω coaxial cable
FM outdoor
antenna
antenna
FM outdoor antenna (not included)
• Disconnect the FM indoor antenna.
• The antenna should be installed by a competent technician.
(For continental Europe, the United Kingdom and
Republic of Ireland)
• Disconnect the FM indoor antenna.
• The antenna should be installed by a competent technician.
(For continental Europe, the United Kingdom and
Republic of Ireland)
Antenna plug adapter (included and necessary for the
United Kingdom and Republic of Ireland)
United Kingdom and Republic of Ireland)
75 Ω coaxial cable
(For Australia and New Zealand)
Two types of wire commonly used for connection from the
antenna are 300 Ω parallel feeder wire and 75 Ω coaxial
cable. For best resistance to interference, use 75 Ω coaxial
cable.
Two types of wire commonly used for connection from the
antenna are 300 Ω parallel feeder wire and 75 Ω coaxial
cable. For best resistance to interference, use 75 Ω coaxial
cable.
FM outdoor
antenna
antenna
75 Ω coaxial
cable
cable
300 Ω feeder
wire
wire
Antenna
plug adapter
(included)
plug adapter
(included)
or
Remove a piece of the
outer vinyl insulator.
outer vinyl insulator.
10 mm
7 mm
Carefully pull the tabs
apart to remove the
cover.
apart to remove the
cover.
Remove the lead wire and
clamp it with the plastic bar.
clamp it with the plastic bar.
Lead wire
Plastic bar
Install the coaxial cable.
Clamp the cable conductor, and
wind it on so that it does not
contact anything else.
Clamp with pliers.
Attach the cover.
To connect a 300 Ω feeder wire
Loosen the screws, connect the wires, and
tighten the screws to secure the connection.
tighten the screws to secure the connection.
Adhesive tape
Rear panel
• Turn off all equipment before making any
connections.
• Peripheral equipment sold separately unless
otherwise indicated.
• To connect equipment, refer to the appropriate
operating instructions.