Panasonic SA-XR700 Operating Guide
46
RQT8743
Help message
Specifications (DIN 45 500)
n
AMPLIFIER SECTION
Power output (at AC 230-240 V)
DIN 1 kHz (T.H.D. 1 %)
2 x 145 W (4 Ω)
20 Hz-20 kHz continuous power output both channels driven
2 x 80 W (6 Ω)
Total harmonic distortion
rated power at 20 Hz-20 kHz
0.09 % (6 Ω)
Power bandwidth
both channels driven, –3 dB
4 Hz to 88 kHz (6 Ω, 0.9 %)
Power output each channel driven (at AC 230-240 V)
DIN 1 kHz (T.H.D. 1 %)
Front (L/R)
100 W (6 Ω)
Center
100 W (6 Ω)
Surround (L/R)
100 W (6 Ω)
Surround Back (L/R)
100 W (6 Ω)
Load impedance
Front (L/R)
A or B
4 to 16 Ω
A and B
6 to 16 Ω
BI-WIRE
4 to 16 Ω
Center
6 to 16 Ω
Surround (L/R)
6 to 16 Ω
Surround Back (L/R)
6 to 16 Ω
Frequency response
CD, AUX, TV/STB, VCR, DVD RECORDER, BD/DVD
4 Hz to 88 kHz, ±3 dB
DVD 6CH
4 Hz to 44 kHz, ±3 dB
Input sensitivity and impedance
CD, AUX, TV/STB, VCR, DVD RECORDER, BD/DVD/DVD 6CH
200 mV/22 kΩ
S/N at rated power (6 Ω)
CD, TV/STB, BD/DVD PLAYER, DVD RECORDER (Digital Input)
90 dB (IHF, A: 103 dB)
Tone controls
BASS
50 Hz, +10 to –10 dB
TREBLE
20 kHz, +10 to –10 dB
Channel balance (250 Hz-6.3 kHz)
±1 dB
Channel separation
55 dB
Subwoofer frequency response (– 6 dB)
7 Hz to 200 Hz
n
FM TUNER SECTION
Frequency range
87.50 to 108.00 MHz
Sensitivity
S/N 30 dB
1.5 µV/75 Ω
S/N 26 dB
1.3 µV/75 Ω
S/N 20 dB
1.2 µV/75 Ω
IHF usable sensitivity (IHF ’58)
1.5 µV/75 Ω
IHF 46 dB stereo quieting sensitivity
22 µV/75 Ω
Total harmonic distortion
MONO
0.2 %
STEREO
0.3 %
S/N
MONO
60 dB
STEREO
58 dB
Frequency response
20 Hz to 15 kHz,
+1 dB, –2 dB
Alternate channel selectivity
±400 kHz,
65 dB
Capture ratio
1.5 dB
Image rejection at 98 MHz
40 dB
IF rejection at 98 MHz
70 dB
Spurious response rejection at 98 MHz
70 dB
AM suppression
50 dB
Stereo separation
1 kHz, 40 dB
Carrier leak
19 kHz, –30 dB
38 kHz,
–50 dB
Channel balance (250 Hz-6.3 kHz)
±1.5 dB
Limiting point
1.2 µV
Bandwidth
IF amplifier
180 kHz
FM demodulator
1000 kHz
Antenna terminal
75 Ω (unbalanced)
n
AM TUNER SECTION
Frequency range
522 to 1611 kHz (9 kHz steps)
530 to 1620 kHz (10 kHz steps)
Sensitivity
20 µV, 330 µV/m
Selectivity (at 999 kHz)
55 dB
IF rejection (at 999 kHz)
50 dB
n
VIDEO SECTION
Output voltage at 1 V input (unbalanced)
1±0.1 Vp-p
Maximum input voltage
1.5 Vp-p
Input/output impedance
75 Ω (unbalanced)
S-Video
Input
TV/STB, BD/DVD PLAYER, DVD RECORDER, AUX
Output
TV MONITOR
Component Video Input
TV/STB, DVD RECORDER
Output
TV MONITOR
n
GENERAL
Power supply
AC 230 to 240 V, 50 Hz
Power consumption
140 W
Dimensions (W x H x D)
430 mm x 107.5 mm x 390 mm
Mass
Approx. 5.3 kg
Notes:
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
Message
Cause/countermeasure
1
Muting is on.
Press [MUTING] on the remote
control to cancel the function
(á page 29).
Press [MUTING] on the remote
control to cancel the function
(á page 29).
2
The selected mode is not “
MUSIC ”.
Change the mode to “
MUSIC ”
(á pages 26 and 27).
3
Center and surround speakers are
not connected, or they are set as
absent. Connect the speakers
(á page 9) or change their setting
to present (á page 33).
not connected, or they are set as
absent. Connect the speakers
(á page 9) or change their setting
to present (á page 33).
4
Surround and surround back
speakers are not connected, or
they are set as absent. Connect
the speakers (á page 9) or change
their setting to present
(á page 33).
speakers are not connected, or
they are set as absent. Connect
the speakers (á page 9) or change
their setting to present
(á page 33).
5
Surround back speakers are not
connected, or they are set as
absent. Connect the speakers
(á page 9) or change their setting
to present (á page 33).
connected, or they are set as
absent. Connect the speakers
(á page 9) or change their setting
to present (á page 33).
Message
Cause/countermeasure
6
You are trying to use the effect
unavailable for DTS-ES sources.
unavailable for DTS-ES sources.
7
You are trying to use the effect
unavailable for DVD-Audio sources.
unavailable for DVD-Audio sources.
8
You are trying to use the effect
unavailable for DVD analogue
6-channel playback.
unavailable for DVD analogue
6-channel playback.
9
You are trying to use the effect
unavailable for the current input
source.
unavailable for the current input
source.
10
(flashing)
The unit is in the “
PCMFIX ” mode.
Cancel this mode (á page 35).
11
“SPEAKERS A” is off. Select
“SPEAKERS A” (á pages 12 and
24).
“SPEAKERS A” (á pages 12 and
24).
12
“SPEAKERS A” and “SPEAKERS
B” are off. Select “SPEAKERS A”
or “SPEAKERS B” (á pages 12, 24
and 25).
B” are off. Select “SPEAKERS A”
or “SPEAKERS B” (á pages 12, 24
and 25).
Digital input
(OPTICAL)
2
(COAXIAL)
2
HDMI (Version 1.2a) Input
2
Output
1
Power consumption in standby mode
0.9 W
(HDMI Off Mode)
0.45 W
Help message/
Specifications
E
N
GL
ISH