Panasonic LQDRM200 Operating Guide

Editing still pictures (continued)

ª Slide Show Intervals 

[SD/CARD] [RAM]

You can set the display timing of slide show. (page 41)

After performing steps 1 to 2 of “Displaying still pictures 
(Album Display)” (page 41), perform the following steps:

3, 4] (10) to select “Others” and press 

(10).

2, 1] (10) to select the desired timing 

(10).

ª Format

[SD/CARD]

You can erase all still pictures in the SD/PC cards.

After performing steps 1 to 2 of “Displaying still pictures 
(Album Display)” (page 41), perform the following steps:

3, 4] (10) to select “Others” and press 

(10).

3, 4] (10) to select “Format” and use 

2, 1] (10) to select “SD CARD” or “PC CARD” 

≥The confirmation screen appears.

2, 1] (10) to select “Yes” and press 

(10).

≥The confirmation screen appears.

2, 1] (10) to select “Start” and press 

(10).

≥Format begins.

(10) to complete the procedure.

ªTo stop partway through

Select “Cancel” in step 6 and press [ENTER] 

Or
Press [RETURN] 

(28).

Note
≥The cards formatted on this unit may not be usable on other 

equipment.

[RAM]

Automatic generation of programmes and play lists is possible for 
using the “DV AUTO REC” function when connecting DV equipment 
(e.g., Digital Video Camera) to the DV input terminal on the front of 
the unit with the DV cable. Recordings from DV cameras can be 
recorded to DVD-RAM and DVD-R media, however the “DV AUTO 
REC” function cannot be used with DVD-R.

Preparation
≥Before connecting any cables, first make sure that the power for 

both units is off.
Then after connecting any cable, turn on the both units.

≥Connect the DV equipment to the DV input terminal on the front 

panel. (page 50)

≥Pause play of the DV equipment at the point you want recording 

to start.

≥Switch [DVD, TV] (19) to “DVD”.

Recording to the disc:

Insert a disc that can be written to.
- Check that disc can be recorded on (page 8).
- Ensure the write protect tab is not set to “PROTECT” 

(page 61).

- Ensure the disc is not write-protected with DISC 

INFORMATION (page 28).

(33) to select the recording 

≥Select “XP”, “SP”, “LP”, or “EP”.

(11).

3, 4, 2, 1] (10) to select “DV AUTO REC” 

≥The DV equipment pauses automatically if it was playing.

2, 1] (10) to select “Rec” and press [ENTER] 

(10).

≥Recording starts.

To stop recording manually
Press [

∫] (7).

*****

E60TEG.book  45 ページ  ２００３年９月１日 月曜日 午後５時６分