Panasonic NVMV21EBL Instruction Manual
VCR
Receiver
26
EXT LINK
!
Press MENU, the Menu screen appears.
!
With select menu Others and confirm with ENTER.
!
With
select [EXT LINK] and turn to [2] or [1]
.
!
Press MENU to return to the Menu screen.
D
Be sure that the timer programmes stored by your VCR do not overlap with
the ones of the satellite or digital receiver. Some external equipment may not
work with this function, refer to the operating instructions for the external unit.
the ones of the satellite or digital receiver. Some external equipment may not
work with this function, refer to the operating instructions for the external unit.
Recording with external
recording controls
Quitting recording stand-by mode
!
Press EXT LINK to quit recording stand-by mode. The EL1 or EL2 display
disappears.
You can now play back a cassette or make a manual recording. You must
press EXT LINK again to reactivate the recording stand-by mode.
disappears.
You can now play back a cassette or make a manual recording. You must
press EXT LINK again to reactivate the recording stand-by mode.
!
Press EXT LINK to activate the VCR´s recording stand-by mode.
Make sure the VCR´s EL1 or EL2 display appears.
As long as the satellite or digital receiver transmits
the special recording signal (EL1), or a video picture
is transmitted (EL2), the VCR will continue to record.
Make sure the VCR´s EL1 or EL2 display appears.
As long as the satellite or digital receiver transmits
the special recording signal (EL1), or a video picture
is transmitted (EL2), the VCR will continue to record.
The following screen will be shown
if you select [EXT LINK 2]:
if you select [EXT LINK 2]:
!
Press ENTER to hide this message.
!
Press EXT LINK to stop recording.
ENTER
: yes EXT LINK :cancel
EXT LINK recording in progress
EXT LINK 1: The VCR recording start and stop time is controlled by a control
signal sent via the 21-pin scart cable from the external unit (e.g.
Sky Digibox).
Sky Digibox).
EXT LINK 2: The VCR will start recording when AV input detects the video
signal and stop recording when the video signal is switched off by
the external unit.
the external unit.
EXT LINK
The AV input of this VCR is equipped for use with external equipment having
external timer recording control such as digital satellite receivers. The AV input
can be set to EXT LINK 1 or EXT LINK 2 depending on the equipment to be
connected. Fully wired 21-pin scart cable is required. Refer also to the
manufacturer’s instruction for the external unit.
The AV input of this VCR is equipped for use with external equipment having
external timer recording control such as digital satellite receivers. The AV input
can be set to EXT LINK 1 or EXT LINK 2 depending on the equipment to be
connected. Fully wired 21-pin scart cable is required. Refer also to the
manufacturer’s instruction for the external unit.
EXT LINK
: select
: return
: exit
MENU
EXIT
Tape length
: AUTO(
E-240)
SQPB
: AUTO
OSD
: 4:3
VCR display
: DIMMED
EXT LINK
: 2
Others
Aerial
TV