Panasonic TY-EW3D2 Operating Guide

8 - ENGLISH

•  Charge the 3D Eyewear before using the first time after purchase or after long 

periods of disuse.

„

„

1.  (When 3D image signals are being received) press the MENU button on 

the television remote control.

2.  Select “Setup”, and press the OK button.

3.  Select “3D settings”, and press the OK button.

4.  Select “Picture Display”, and use 

 to select “3D” or “2D”.

 

 

The procedure above is only an example. For details, see the television operating 

instructions.

„

„

1.  Set the power switch to “ON”. 

(The indicator lamp will light for approximately 2 seconds, then flash 

once approximately every 2 seconds.)

2.  Put on the 3D Eyewear. 

If the 3D images are not displayed correctly, adjust the 3D image-related settings.

For details, see the television operating instructions.

* The perceived three dimensional effects of the 3D Eyewear differ from person to 

person.

•  If the eyewear stops receiving infra-red signals from the television, the power 

automatically switches off after 5 minutes. If that happens, set the power switch 

to “OFF” then “ON” again.

•  For television settings, see the television operating instructions. 

„

„

Set the 3D Eyewear power switch to “OFF”.

(The 3D Eyewear indicator lamp turns off, and the power turns off.)

After using the 3D Eyewear, store it in the case provided.