Panasonic KXHNK101 Operating Guide
Installing the mounting bracket
Installing the mounting bracket on wooden walls
Line up the holes on the mounting bracket with the holes in the wall, then insert
and tighten each screw.
Note:
R Use the supplied screws (
Line up the holes on the mounting bracket with the holes in the wall, then insert
and tighten each screw.
Note:
R Use the supplied screws (
1
).
R Place the bracket with the “UP” mark facing upwards.
1
1
Installing the mounting bracket on gypsum board, ALC (autoclaved
lightweight cellular concrete), or concrete blocks
Use the supplied anchors and screws to mount the mounting bracket to the wall.
Note:
R Supplied anchors ø: 5 mm
lightweight cellular concrete), or concrete blocks
Use the supplied anchors and screws to mount the mounting bracket to the wall.
Note:
R Supplied anchors ø: 5 mm
´ 25 mm (ø: 3/16 inches ´ 1 inch).
R Supplied screws ø: 4 mm
´ 25 mm (ø: 5/32 inches ´ 1 inch).
1
Mark the hole depth (
1
) on the drill bit at 35 mm (1 3/8 inches) and then drill
the hole.
R Use a 3/16 inch (4.8 mm) drill bit.
R Use a 3/16 inch (4.8 mm) drill bit.
1
2
Remove debris.
12
For assistance, please visit http://shop.panasonic.com/support
Setup
HNK101_(en_es)_0618_ver.041.pdf 12
2015/06/18 20:12:06