Panasonic KX-PRS120 Operating Guide
3
MOFFN
Setting the first ring for the call block
list
list
If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to “Off”. The default setting is “On”.
on the call block list to sound, turn the first ring
setting to “Off”. The default setting is “On”.
1
MMenuN (right soft key) #173
2
MbN: Select the desired setting. a MSaveN
3
MOFFN
Viewing/editing/erasing call block
numbers
numbers
1
MMenuN (right soft key) #217
2
MbN: Select the desired entry.
R To exit, press MOFFN.
R To exit, press MOFFN.
3
To edit a number:
MEditN a Edit the phone number. a
MSaveN a MOFFN
To erase a number:
MEraseN a MbN: “Yes” a MSelectN a
MOFFN
MEditN a Edit the phone number. a
MSaveN a MOFFN
To erase a number:
MEraseN a MbN: “Yes” a MSelectN a
MOFFN
Baby monitor
This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house or place. The monitored handset
(placed in a baby’s room, for example) will
automatically call the monitoring handset or
the phone number stored when it detects
sound.
Important:
R You should perform a test run of the baby
where another handset is located, allowing
you to easily monitor from different areas of
the house or place. The monitored handset
(placed in a baby’s room, for example) will
automatically call the monitoring handset or
the phone number stored when it detects
sound.
Important:
R You should perform a test run of the baby
monitor procedure to ensure that the baby
monitor feature is set correctly. For
example, test its sensitivity. Check the
connection if you are diverting the baby
monitor to an outside line.
monitor feature is set correctly. For
example, test its sensitivity. Check the
connection if you are diverting the baby
monitor to an outside line.
Note:
R If the unit is connected to a PBX system,
R If the unit is connected to a PBX system,
you cannot set the baby monitor.
R During the monitoring mode, battery
consumption is faster than usual. We
recommend leaving the monitored handset
on the base unit or charger.
recommend leaving the monitored handset
on the base unit or charger.
R The monitored handset never rings during
the monitoring mode.
Setting the baby monitor
Perform the setting operation with the handset
to be monitored (for example, the handset
placed in a baby’s room).
to be monitored (for example, the handset
placed in a baby’s room).
To monitor with a handset
The internal baby monitor feature is only
available between handsets in the same radio
cell.
available between handsets in the same radio
cell.
1
MMenuN (right soft key) #268
2
MbN: “On” a MSelectN
3
MbN: Select the desired handset number
to monitor with. a MSaveN
R “Baby monitor” will be displayed.
R The registered handset name/number
to monitor with. a MSaveN
R “Baby monitor” will be displayed.
R The registered handset name/number
is displayed.
Note:
R When this feature is on, another handset
R When this feature is on, another handset
can hear the monitored handset by making
an intercom call.
an intercom call.
To monitor from an outside line
n
From the phonebook:
1
MMenuN (right soft key) #268
2
MbN: “On” a MSelectN
3
MbN: Select “External” to monitor
from an outside line. a MEditN a
MAddN
from an outside line. a MEditN a
MAddN
4
MbN: “Phonebook” a MSelectN
5
MbN: Select the phonebook entry. a
MSelectN
MSelectN
6
MbN: Select the desired phone number.
a MSaveN
R “Baby monitor” will be displayed.
a MSaveN
R “Baby monitor” will be displayed.
For assistance, please visit http://www.panasonic.com/help
29
Programming
PRS120(en)_0122_ver110.pdf 29
2014/01/22 10:09:31