Panasonic KX-TG6324 Operating Guide

12

Connect the AC adaptor cord (

A) by 

pressing the plug firmly (

B). Connect 

the telephone line cord until it clicks into 
the base unit and telephone line jack 
(

C).

L

Use only the supplied Panasonic AC 
adaptor PQLV207.

L

Use only the supplied telephone line 
cord. Using another telephone line 
cord may not allow the unit to work 
properly.

L

Use only the supplied Panasonic AC 
adaptor PQLV209.

Note:
L

The AC adaptor must remain 
connected at all times. (It is normal for 
the adaptor to feel warm during use.)

L

The AC adaptor should be connected 
to a vertically oriented or floor-
mounted AC outlet. Do not connect 
the AC adaptor to a ceiling-mounted 
AC outlet, as the weight of the adaptor 
may cause it to become disconnected.

During a power failure
The unit will not work during a power 
failure. We recommend connecting a 
corded-type telephone (without AC 
adaptor) to the same telephone line or to 
the same telephone line jack using a 
Panasonic T-adaptor (page 6). 
Emergency power can be supplied to the 
unit by connecting a Panasonic battery 
back-up power supply noted on page 6.

If you subscribe to a DSL/ADSL 
service
Please attach a DSL/ADSL filter (contact 
your DSL/ADSL provider) to the 
telephone line between the base unit 
and the telephone line jack in the event 
of the following:
– noise is heard during conversations.
– Caller ID features do not function 

properly.

Available for:
KX-TG6312/KX-TG6313/
KX-TG6322/KX-TG6323/KX-TG6324

(120 V AC, 
60 Hz)

To single-line 
telephone jack 
(RJ11C)

A

C

Hook

B

A

(120 V AC, 60 Hz)

B

Hooks

To single-line
telephone 
jack (RJ11C)

DSL/ADSL filter

TG63xx_OI.book  Page 12  Thursday, January 10, 2008  9:02 AM