Panasonic KX-P8420 Operating Guide

This chapter describes how to configure the printer’s Setup options. The 
settings you specify in Setup determine user access to the printer, printing 
defaults applied to jobs, and general system settings. Some Setup options 
are specified during an initial Setup from the printer’s front panel; others 
must be set later from Fiery WebSetup.

Initial Setup for network printing must be performed using the front panel. 
After the initial Setup is complete, you must finish configuring Setup options 
using Fiery WebSetup (see 

). Some options set from the front 

panel can also be modified using Fiery WebSetup. 

The general steps for performing Setup from the front panel are:

•

Specify parallel port settings (

•

Specify network port settings (

•

Specify network protocol settings (

Before you change any Setup options, it’s a good idea to print the current 
configuration settings, in case you need to restore these settings later. For 
information on printing a configuration page, see “Printing pages from the 
front panel” on 

Use the following procedure to access the Parallel Port Setup, Network Port 
Setup, and Network Protocol Setup menus from the front panel.

Turn on the printer.

Wait until 

Ready

 or 

Ready(Sleep)

 is displayed.

Press the Menu/Exit button.

To advance through the options, press the Continue/
Forward button; to return to previous options, press the 
Cancel/Left button.

To select an option, press the Enter button.

Repeat steps 3 and 4 to continue accessing other options.

To exit the Setup menus at any time, press the Menu/
Exit button.