Panasonic PV-DM2792 Operating Guide
35
Advanced Operation
Program End Search
Locates end point of recording for continuity.
Press SEARCH twice in Playback or
Stop mode to display PROGRAM
END SEARCH screen .
Stop mode to display PROGRAM
END SEARCH screen .
1
SEARCH START
:
FF
EX I T
:
SEARCH
PROGRAM END SEARCH
Press FF
to start search.
to start search.
Example of Program End Search operation.
Fig.1
Fig.2
Fig.3
If search exceeds a few seconds in BLANK area.
PLAYBACK DIRECTION
Program 1
Program 2 or BLANK
INDEX
Program 2
BLANK
INDEX
BLANK
Program 1
Program 2
BLANK
Program 1
INDEX
Press SEARCH button
Press SEARCH button
FF
FF
Press SEARCH button
FF
End Point
2
End Point
Upon locating end point...
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.
Press SEARCH button
• If Program End Search is started very close
to an index mark, that mark may be
skipped over.
skipped over.
End Point
Note
*Important: If a remote control button does not work when pressed, press the
button on the remote
and try the button again.
To cancel,
press PLAY or STOP.
press PLAY or STOP.