Panasonic DMREZ47VEB Operating Guide

23

RQT8857

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]

 ]RAM\ If the disc is protected, release protection

(

¼ 56).

 [VHS] Ensure accidental erasure tab is intact.
 Connect a satellite receiver to this unit’s input 

terminals (

¼ 9).

 When the output signal from the external equipment 

is NTSC, change the “TV System” to “NTSC” in the 
Setup menu (

¼ 63).

With the unit stopped.

 

SELECT

INPUT

 to select “AV2” for the 

satellite receiver you have 

connected.

  Select the channel on the satellite 

receiver. 

 

REC MODE

 to select the recording 

mode.

 Tips

To skip unwanted parts
Press [

PAUSE] to pause recording. (Press again to restart 

recording.)

To stop recording
Press [

STOP].

 ]RAM\ If the disc is protected, release protection

(

¼ 56).

 [VHS] Ensure accidental erasure tab is intact.

 Make sure you connect the AV2 input terminal of 

this unit to “VCR Scart Terminal” of a SKY Digital 
STB/satellite receiver with a 21-pin scart cable 
(

¼ 9).

 Set the “AV2 Input” and “Ext Link” to match the 

connected equipment in the Setup menu (

¼ 63).

  Make timer programming on SKY 

Digital STB/satellite receiver.

− Refer to the equipment’s operating instructions. 

 Tips

To cancel the external control
Press [EXT LINK] to stop recording or to cancel linked timer 
recording standby (The unit turns on and ‘‘EXT-L” disappears.).

¼ 26)

 Notes

 In order to prevent accidental operation, press [EXT LINK] to 

cancel the setting after recording is fi nished.

 This function does not work with some equipment. Refer to the 

equipment’s operating instructions.

 The beginnings of recordings may not be recorded correctly in 

some cases.

 When “Ext Link” is set to “Ext Link 2”, this function does not work 

if the input signal is NTSC system.

 Programmes are recorded as one title on this unit when the end 

time of the earlier timer recording and the start time of the later 
timer recording are close to each other.
[RAM] To divide the titles, go to “Divide Title” (¼ 46).

 While the unit is in EXT LINK standby mode or recording, video 

picture is from the AV2 input terminal irrespective of “AV1 Output” 
setting (

¼ 63).

 

REC

 to start recording.

To record programmes from a SKY Digital STB/satellite 
receiver using timer programming

 

EXT LINK

− The unit turns off and “EXT-L” lights on the 

unit’s display to indicate timer recording 
standby has been activated.

− While the unit is in EXT LINK standby mode 

or recording, most operations on this unit are 
prohibited ([

 OPEN/CLOSE], [/l] etc.).

When you operate, press [EXT LINK] to 
cancel EXT LINK standby mode or recording 

(The unit turns on and “EXT-L” disappears.).

 

 DRIVE
SELECT

  to select the DVD or VHS 

drive.

– Insert a disc or video cassette with enough 

remaining blank space (

¼ 72, 74).

 

 DRIVE
SELECT

  to select the DVD or VHS 

drive.

– Insert a disc or video cassette with enough 

remaining blank space (

¼ 72, 74).

DMR-EZ47V_EB.indb   23

DMR-EZ47V_EB.indb   23

2007/04/11   9:12:55

2007/04/11   9:12:55