Panasonic DMREZ48VEB Operating Guide

29

RQT9126

 Notes

 Only one piece of DV equipment (e.g., digital video camcorder) 

can be connected to the unit via the DV input terminal.

 When timer recording starts while recording from an external 

device, timer recording takes priority and recording from the 
external device stops.

 If the desired audio is not recorded, select the kind of audio for 

“Audio Mode for DV Input” in the Setup Menu (

¼ 65).

 [RAM] Programmes are recorded as a single item; breaks in the 

images create chapters and playlists are created automatically.

 If you use video camcorders from other manufacturers, these are 

not guaranteed to work.

 Depending on the DV equipment, the images or audio may not be 

input properly.

 The DV input on this unit is for use with DV equipment only. 

(It cannot be connected to a computer, etc.)

 It is not possible to operate the unit from the connected DV 

equipment.

 The DV equipment name may not be shown correctly.
 Date and time information is not recorded, even if displayed on 

the camcorder.

 You cannot record and play at the same time.

Connect the cable while both the unit and the external 
device are turned off.

 

Front of the unit

S VIDEO

IN 2 

VIDEO

/MONO AUDIO R

L

4-pin DV Cable

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]

 

REC MODE

 to select the recording 

mode (

¼ 24).

  Turn on the DV equipment and 

pause play at the point you want 
to start recording.

“DV Auto Rec” 
screen may appear.

 

 to select “Rec to DVD”, then 

OK

 

 to select “Rec”, then 

OK

 Tips

When recording fi nishes
The confi rmation screen appears. 
Press [OK] to fi nish DV camcorder recording.

To stop recording
Press [

 STOP].

The confi rmation screen appears. Press [OK].

If the DV camcorder recording function does not work properly, 
check the connections and DV equipment settings, and turn the 
unit off and back on. If that does not work, follow the instructions on 
page 28

 Turn on the unit.
 Insert a disc (¼ 73). 
 [RAM] If the disc is protected, release protection 

(

¼ 60).

 When the output signal from the external device is 

NTSC, change the “TV System” to “NTSC” in the 
Setup Menu (

¼ 67).

 When recording bilingual programmes (¼ 65)

Perform steps 

– (¼ above).

1. Press [DRIVE SELECT] to select the DVD drive.
2. Press [FUNCTION MENU].
3. Press [

, ] to select “To Others”, then press [OK].

4. Press [

, ] to select “DV Auto Rec”, then press [OK].

You can proceed to step 

 (¼ right).

DMR-EZ48V_EB.indb   29

DMR-EZ48V_EB.indb   29

2008/04/04   16:39:24

2008/04/04   16:39:24