Panasonic DMREZ48VEB Operating Guide

65

RQT9126

Change the settings when you have connected equipment 
through the unit’s DIGITAL AUDIO OUT terminal (

¼ 72).

Press [OK] to show the following settings.

Select how to output audio with a sampling frequency of 96 kHz 
or 88.2 kHz.
Signals are converted to 48 kHz or 44.1 kHz despite the above 
settings if the signals have a sampling frequency of over 96 kHz 
or 88.2 kHz, or the disc has copy protection.
[On]  

Signals are converted to 48 kHz or 44.1 kHz. (Choose 
when the connected equipment cannot process signals 
with sampling frequency of 96 kHz or 88.2 kHz.)

[Off]  

Signals are output as 96 kHz or 88.2 kHz. (Choose 
when the connected equipment can process signals 
with sampling frequency of 96 kHz or 88.2 kHz.)



Choose whether to output by “Bitstream”, 
which processes Dolby Digital signals on 
other connected equipment, or to convert 
the signals to “PCM (2ch)” on the unit 
before output. 
[Bitstream]  

When you have connected the unit to a piece of 
equipment having Dolby Digital logo.

[PCM]  

When you have connected the unit to a piece of 
equipment that doesn’t have Dolby Digital logo.



Choose whether to output by “Bitstream”, 
which processes DTS signals on other 
connected equipment or to convert the 
signals to “PCM (2ch)” on the unit before 
output. 

[Bitstream]  

When you have connected the unit to a piece of 
equipment having DTS logo. 

[PCM]  

When you have connected the unit to a piece of 
equipment that doesn’t have DTS logo.



Choose whether to output by “Bitstream”, which processes 
MPEG audio signals on other connected equipment or to 
convert the signals to “PCM (2ch)” on the unit before output.
[Bitstream] 

 When you have connected the unit to a piece 
of equipment with a built-in MPEG decoder.

[PCM] 

 When you have connected the unit to a 
piece of equipment without a built-in MPEG 
decoder.

Choose the audio type when recording or copying with XP 
mode.
[Dolby Digital] (

¼ 92)

[LPCM] (

¼ 92)

 The picture quality of LPCM recordings may be lower than 

that of normal XP mode recordings.

 The audio recording becomes Dolby Digital even if you 

selected LPCM when using a recording mode other than XP.

You can select the kind of audio when recording from the unit’s 
DV IN terminal (

¼ 29).

[Stereo 1]   Records audio (L1, R1)
[Stereo 2]   Records added audio such as narration (L2, R2) 

subsequent to original recording.

[Mix]  

Records both Stereo 1 and Stereo 2.

When recording bilingual broadcast, select the type of audio in 
advance from “Bilingual Audio Selection” (

¼ left).



  Incorrect settings can cause noise to be output which can 

be harmful to your ears and speakers, and audio will not be 
recorded properly on media such as mini discs.

FU

NC

TIO

N M

EN

U 

 

 

 

  

 

(

¼ 62, Accessing the Setup Menu)

All factory default settings are indicated with “Underlined” text.

Sound

,  select “Sound” ¼  ¼ ,  select item ¼ 

OK

[DVD-V] (Dolby Digital only)
Change the dynamic range (

¼ 92) for easier listening in low 

volume.
[On] [Off]

[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
When recording bilingual programmes from equipment connected 
to the DV IN terminal of this unit, select whether to record the 
main or secondary audio type.
[M 1] [M 2]

DMR-EZ48V_EB.indb   65

DMR-EZ48V_EB.indb   65

2008/04/04   16:39:41

2008/04/04   16:39:41