Panasonic DMREZ48VEB Operating Guide

68

RQT9126

FU

NC

TIO

N M

EN

U 

 

 

 

  

 

(

¼ 62, Accessing the Setup Menu)

All factory default settings are indicated with “Underlined” text.

Others

¼ 80)

[DVD 1] [DVD 2] [DVD 3] 

¼ 12)

¼ 11)

In order to prevent another person from using this unit if it is 
stolen, you can set a PIN number and input your personal 
information.
Once the PIN number has been set, you cannot return to the 
factory preset. Make sure not to forget this.
 PIN number
 Name
 House No.
 Postcode

[On] [Off]
Refer to the following when “Power Save” is set to “On”.
 Power consumption is minimized when the unit is turned off 

(

¼ 94).

 Startup of the unit becomes slower compared to when “Power 

Save” is “Off”.

 When the unit is off, satellite programmes cannot be watched 

on the TV because the signal from the satellite receiver 
connected to AV2 input terminal of this unit is not looped 
through. To watch them, turn on the unit. (

¼ 11)

In order to update this unit, the TV Guide download, and support 
system changes made by broadcasts, this unit periodically 
performs software updates.
 Press [OK] to show the following settings.
 Update data and TV Guide download information are sent by an 

unscheduled digital broadcast. In order to receive these updates, 
you must be able to receive digital broadcasts.

 An update will take approximately 60 minutes. While the update is 

in progress, “SW-DL” appears on the unit’s display. 
You cannot operate the unit until the update is complete.
Removing the AC mains lead while the update is in progress may 
damage the unit.

 An TV Guide download will take approximately 30 minutes.

While the TV Guide download is in progress, “GUIDE” appears on 
the unit’s display. The TV Guide download can be interrupted by 
switching on the unit.

 To avoid hearing the startup sound of System Update for the 

unit, perform the following steps.

–  Select the time for Software Update (

¼ below, TV Guide/

Software search period).

–  Set “TV Guide Download in Standby” and “Software Update 

in Standby” (

¼ below) to “Off”, and update manually 

(

¼ below, Software Update Search Now).

[On] 

 When the unit is turned off, TV Guide data is 
downloaded automatically.

[Off]

[On] 

 You can perform the unit updates automatically when 
the unit is turned off.

[Off]

Selects the time to automatically perform TV Guide download 
and updates when the unit is turned off. This can only be set 
when “TV Guide Download in Standby” and “Software Update in 
Standby” is set to “On”.
 If there is a programmed recording set for the time you have 

selected, the programmed recording will be given priority.

[Automatic]   The unit will give priority to searching for update 

data at midnight.

[02:00–06:00] [06:00–10:00] [10:00–14:00] 
[14:00–18:00] [18:00–22:00] [22:00–02:00]

Start the search for new software manually.
A new software version is announced by a message. Do not 
switch your unit off during the update. This could result in the 
loss of data. A message shows that the update has fi nished. If a 
new software version is not going to be broadcast until the next 
few days, a corresponding message also appears.
 If applicable update data is found, press [, ] to select 

“Yes” and press [OK].

Press [OK] to show the following settings.

This returns Setup Menus to default settings, except for the 
ratings level, ratings password, Owner ID and Clock setting.
[Yes] [No]
 The timer recording programmes are also cancelled.

This returns Setup Menus to default settings, except for the 
programmed channels, time settings, disc language settings, 
ratings level, ratings password, Owner ID and remote control code.
[Yes] [No]

VHS

Set the length of the tape you are using so the unit can show the 
correct remaining time.
[Auto (E-240)]   The VHS automatically distinguishes E30, -60, 

-90, -120, -180, and -240 tapes.

[E-195] 

For E195 tape

[E-260] 

For E260 tape

[E-300]  

For E300 tape

To play back video cassettes recorded in S-VHS format (SQPB; 
S-VHS Quasi Playback)
[Automatic]  

This unit automatically detects the format in 
which the recording was made and selects the 
same format for playback. However, picture 
distortion may appear.
Therefore, set to [On] or [Off].

[On]  

Use this setting when playing back a cassette 
tape recorded in the S-VHS format.

[Off]  

Use this setting when playing back a cassette 
tape recorded in the VHS format only.

,  select “VHS” ¼  ¼ ,  select item 

¼ 

OK

,  select “Others” ¼  ¼ ,  select item 

¼ 

OK

DMR-EZ48V_EB.indb   68

DMR-EZ48V_EB.indb   68

2008/04/04   16:39:42

2008/04/04   16:39:42