Panasonic DMREZ28 Operating Guide

28

RQT9118

 

The timer icon is displayed in left column.

 

“z” lights on the unit’s display to indicate 
timer recording standby has been activated. 
Repeat steps

   – 

 to programme other 

recordings.
Press [8] to turn the unit off.

–

–

–

–

 Notes

“z” on the unit’s display flashes when the unit cannot go to timer 
recording standby. (e.g., a recordable disc is not in the disc tray).
When timer recordings are set to start one immediately after another, 
the unit cannot record the beginning of the later programme.
If two timer recording times overlap, the first recording always has 
priority. The second recording will start only after the first recording 
has finished.
Recorded subtitles cannot be deleted later.
Timer Recording does not start while a disc is being formatted, 
deleted or finalised. The recording begins afterwards.
When “Name” is set in AV1, AV2 or AV3, STTL setting is unavailable.

 Tips

To exit the timer recording list
Press [PROG/CHECK].

“Date” Setting
Each press of [e] changes items in the order below.
(Each press of [r] changes items in the reverse order.)

Daily timer

Weekly timer

One month later

minus one day

Current date

SAT

---

---

SUN

SUN-SAT

MON-SAT

MON-FRI

You can also use the numbered buttons to enter “Name”, “Date”, 
“Start” and “Stop”.
You can also press [REC MODE] to switch “Mode” and press
[STTL   ] to switch “STTL”.

•

•

•

•
•

•

•

•

•

 

While the unit is on 

Confirmation screen appears.

–

 w to select “Stop Recording”, 

then 

 Notes

Recording stops and the timer programme is deleted. (Daily and 
weekly timer programmes remain and timer recording will start from 
the next time the timer recording is set.)

 

See “ Timer Recording screen icons” (

➔ 29) 

for explanation of icons displayed.

–

 e, r to select the programme.

 

(Red)

“z” (

➔ 29) disappears from the timer 

recording list.
Press the “Red” button again to activate timer 
programme.

–

–

 Tips

You can deactivate the timer programme in the following 
procedure as well.
Perform steps   –   (

➔ above)

1. Press [OPTION].
2. Press [e, r] to select “Timer Off”, then press [OK].

DMR-EZ28-EB _RQT9118-B.indb   28

DMR-EZ28-EB _RQT9118-B.indb   28

2008/04/04   10:32:02

2008/04/04   10:32:02