Panasonic DMREZ28EB Operating Guide

27

RQT9118

 Turn on the DV equipment and 

pause play at the point you want 

to start recording.

“DV Auto Rec” screen may appear.

Perform steps   –   (

➔ 26, Recording from a DV Camcorder)

1. With the unit stopped

Press [FUNCTION MENU].

2. Press [e, r] to select “To Others”, then press [OK].
3. Press [e, r] to select “DV Auto Rec”, then press [OK].
You can proceed to step   (

➔ below).

 w to select “Rec to DVD”, then 

 w to select “Rec”, then 

 

 Notes

Only one piece of DV equipment (e.g., digital video camcorder) can 
be connected to the unit via the DV input terminal.
When timer recording starts while recording from an external 
device, timer recording takes priority and recording from the 
external device stops.
If the desired audio is not recorded, select the kind of audio for 
“Audio Mode for DV Input” in the Setup menu (

➔ 53).

 Programmes are recorded as a single item; breaks in the 

images create chapters and playlists are created automatically.
Depending on the DV equipment, the images or audio may not be 
input properly.
The DV input on this unit is for use with DV equipment only. 
(It cannot be connected to a computer, etc.)
If you use video camcorders from other manufacturers, these are 
not guaranteed to work.
It is not possible to operate the unit from the connected DV 
equipment.
The DV equipment name may not be shown correctly.
Date and time information is not recorded, even if displayed on the 
camcorder.
You cannot record and play at the same time.

 Tips

When recording finishes
The confirmation screen appears.
Press [OK] to finish DV camcorder recording.

To stop recording
Press [

■ STOP].

The confirmation screen appears. Press [OK].

If the DV camcorder recording function does not work properly, check 
the connections and DV equipment settings, and turn the unit off and 
back on. If that does not work, follow the instructions of “Recording 
from a VCR, etc.” (

➔ 26). 

•

•

•

•

•

•

•

•

•
•

•

 

 

 

 

 

 

•  Turn on the television and select the appropriate 

video input to suit the connections to this unit.

• 

 If the disc is protected, release protection

(

➔ 48).

•  Insert a disc with enough remaining blank space.

•  Confirm that the clock on the unit’s display is set to 

the correct time.

•  If connected via a satellite receiver, set channel 

there before timer recording starts.

 

Drive

space

No. Name

Date Start Stop Mode STTL

Press OK to store new programme.

Timer

Recording

OK

RETURN

Remain 1:54 SP

THU 21/02/08 18:45:15

NewTimer Programme

 e, r to select “New Timer 

Programme”, then 

 w, q to move through the items 

and e, r to set the items.

 

AllServices : -----

Timer

Recording

OK

RETURN

Change

Profile

Name

Date

Start Stop

Mode STTL

--/-- --- --:-- --:--

--

SP

Programme Name

Number

0

9

Please set Channel.

---

Remain 1:54 SP

THU 21/02/08 18:45:15

Name:

TV Station Name/External Input

When recording satellite 

programmes, select “AV2”.
You can press the “Blue” button to 
change the category.
[e.g., Free Services, Radio, 
Registered Profiles (

➔ 50, Edit 

Profiles)]

–

•

•

Date:

You can set a daily or weekly 

programme (

➔ 28, Tips).

–

Start (start time) / Stop (end time):

Hold button to change in 30-minute 

increments or decrements.

–

Mode:

Recording mode (

➔ 22)

–

STTL [Subtitles (

➔ 36)]:

ON/OFF

–

Programme Name:

Press [OK]. (

➔ 40, Entering Text)

(continued on the next page)

DMR-EZ28-EB _RQT9118-B.indb   27

DMR-EZ28-EB _RQT9118-B.indb   27

2008/04/04   10:32:01

2008/04/04   10:32:01