Panasonic DMREZ27EB Operating Guide

50

RQT8856

(

➔ 46, Accessing the Setup Menu)

All factory default settings are indicated with “Underlined” text.

Display

e, r select “Display” ➔ q ➔ e, rselect item ➔

Choose the subtitle language for digital broadcast.
If the selected subtitle is not available, then the available subtitle 
will be shown.
[English] [Welsh] [Gaelic]
[English for hearing impaired]
[Welsh for hearing impaired]
[Gaelic for hearing impaired]

Choose the approximate time until the digital channel information 
screen (

➔ 32) disappears automatically.

The length of time the control panel (

➔ 35) is displayed can also 

be changed, but “Off” does not work.
[Off]

The digital channel information is not displayed.

[3 sec.] [5 sec.] [7 sec.] [10 sec.]

Changes the brightness of the unit’s display.
Regardless of the setting, when “Power Save” (

➔ 52) is “On” and 

this unit is turned off, the unit’s display is turned off.
[Bright]
[Dim]

When a new DVB channel is added this unit will be informed 
automatically. Then the confirmation message appears. If 
you select “Yes” on the display, Auto Setup starts (all channel 
settings and all created profiles are deleted. The timer recording 
programmes are also cancelled.).
[Automatic]
[Off]

The Service Messages are not shown.

Connection

e, r select “Connection” ➔ q ➔ e, rselect item ➔

This setting needs to be changed when connected to a 4:3 
standard aspect TV. 
Press [e, r] to select the TV Aspect then press [OK].
[16:9] [4:3] [Letterbox]

 Notes

4:3

16:9

4:3 standard aspect television

16:9 widescreen television

• 16:9:  When connected to a 16:9 widescreen television.

However, the 4:3 aspect ratio picture expands left and 
right.

• 4:3:  Side picture is trimmed for 16:9 
 picture 

(

➔72, Pan & Scan).

Letterbox: When connected to a 4:3 

 

aspect television, widescreen 

 

picture is shown in the letterbox 

 style 

(

➔ 72).

You can enjoy progressive video by connecting this unit’s 
COMPONENT VIDEO OUT terminals to an LCD/plasma television 
or LCD projector compatible with progressive scan (

➔ 72).

Before this setting, set “AV1 Output” to “Video (with component)” or 
“S Video (with component)” (

➔ 51).

Press [e, r] to select “On” then press [OK].
[On]  Output becomes progressive.
[Off]
This setting is fixed with “Off” and there is no output from the 
COMPONENT VIDEO OUT terminals if you set “AV1 Output” to 
“RGB 1 (without component)” or “RGB 2 (without component)” 
(

➔ 51).

 Notes

When connected to a regular television (CRT: Cathode ray 
tube) or a multi-system television using PAL mode, even if it is 
progressive compatible, progressive output can cause some 
flickering. Turn off “Progressive” if this occurs (

➔ 43).

Picture will not be displayed correctly if connected to an 
incompatible television.

•

•

RQT8856-B_DTP_070306.indb   50

RQT8856-B_DTP_070306.indb   50

2007/04/04   17:49:31

2007/04/04   17:49:31